Microstructural model for shear strain localization and occurrence of adiabatic shear band at high strain rates p. 935

M.N. Bassim and A.G. Odeshi

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009131

• PDF (1.545 MB)

Catastrophic rupture of heterogeneous brittle materials under impact loading p. 941

H.Y. Wang, J. Shu, Y.L. Bai, M.F. Xia and F.J. Ke

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009132

• PDF (161.7 KB)

Dynamic behavior and fracture of granular composite Al-W p. 947

Po-Hsun Chiu and V.F. Nesterenko

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009133

• PDF (641.3 KB)

A new perspective on adiabatic shear failure p. 955

D. Rittel

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009134

• PDF (353.9 KB)

Influence of shockwave obliquity on deformation twin formation in Ta p. 963

G.T. (Rusty) Gray III, V. Livescu, E.K. Cerreta, T.A. Mason, P.J. Maudlin and J.F. Bingert

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009135

• PDF (708.5 KB)

Soft recovery of a ferrous alloy: Structural modification and properties p. 971

T. d'Almeida, D.J. Chapman, W.G. Proud, P.J. Gould, P.D. Church, M. Reynolds, R. Wheeler, H.J. MacGillivray, M. Di Michiel and J.M. Merino

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009136

• PDF (743.0 KB)

Dynamic shear deformation in high purity iron p. 977

E. Cerreta, J. Bingert, C. Trujillo, M. Lopez, C. Bronkhorst, B. Hansen and G. Gray

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009137

• PDF (901.0 KB)

Effect of the dynamic loading rate on the failure of bulk metallic glasses p. 985

H. Couque, Y. Champion and S. Nowak

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009138

• PDF (850.9 KB)

Strain rate-dependent shear band behavior in bulk metallic glasses p. 993

M.Q. Jiang and L.H. Dai

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009139

• PDF (647.4 KB)

Laser compression and fragmentation of metals p. 999

M.A. Meyers, H. Jarmakani, B.Y. Cao, C.T. Wei, B. Kad, B.A. Remington, E.M. Bringa, B. Maddox, D. Kalantar, D. Eder and A. Koniges

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009140

• PDF (1.155 MB)

Microstructure and texture evolution in high manganese TWIP steels p. 1007

S. Curtze, V.-T. Kuokkala, M. Hokka and T. Saarinen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009141

• PDF (1.252 MB)

Multiscale analysis of the effect of grain size on the dynamic behavior of microalloyed steels p. 1015

A.K. Zurek, K. Muszka, J. Majta and M. Wielgus

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009142

• PDF (812.1 KB)

Strain induced martensitic transformation at high strain rate in two austenitic stainless steels p. 1023

S. Nanga, A. Pineau, B. Tanguy, L. Nazé and P.-O. Santacreu

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009143

• PDF (739.5 KB)

Effect of heat treatment on the dynamic deformation response of a Fe-10Ni-0.1C steel p. 1031

R. Gupta and K.S. Kumar

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009144

• PDF (1.002 MB)

Mechanical behaviour of SiO₂ nano-particle filled epoxy at high strain rates p. 1039

L.M. Yang, G.C. Zhou, S.K. Liao, L. Song and L.J. Shen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009145

• PDF (235.1 KB)

The mechanical response of a Uranium-Niobium alloy: A comparison of cast versus wrought processing p. 1045

C.M. Cady, G.T. Gray III, S.R. Chen, E.K. Cerreta, C.P. Trujillo, M.F. Lopez, R.M. Aikin Jr., D.R. Korzekwa and A.M. Kelly

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009146

• PDF (509.2 KB)

Evolution process of adiabatic shear localization in TC18 titanium alloy and 30CrMnSiNiMoV steel p. 1053

L. Wang, P. Miao, S.K. Li, K. Sun, X.W. Cheng and F.C. Wang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009147

• PDF (635.3 KB)

Shock induced multi-mode damage in depleted Uranium p. 1061

D.D. Koller, E.K. Cerreta and G.T. Gray III

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009148

• PDF (635.5 KB)

Strain rate and temperature effects on stress-strain behaviour of cast high alloyed CrMnNi-steel p. 1069

L. Krüger, S. Wolf, U. Martin, P. Scheller, A. Jahn and A. Weiß

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009149

• PDF (721.4 KB)

Experimental and theoretical investigation of the dynamic properties of aluminum with helium bubbles p. 1075

B. Glam, S. Eliezer, D. Moreno, Z. Henis, E. Raicher, S. Pecker, M. Sudai and D. Eliezer

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009150

• PDF (540.6 KB)

The dynamic behaviour of a modified polyurethane resin p. 1081

G.J. Appleby-Thomas, P.J. Hazell, C. Stennett, G. Cooper and R. Cleave

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009151

• PDF (218.4 KB)

Influence of spherical converging shock waves on the structure of Al–4% Cu alloy p. 1089

A.V. Dobromyslov, N.I. Taluts, A.N. Uksusnikov and E.A. Kozlov

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009152

• PDF (1.671 MB)

High-rate deformation of a niobium single crystal under loading by spherical converging shock waves p. 1095

A.V. Dobromyslov, N.I. Taluts and E.A. Kozlov

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009153

• PDF (1.981 MB)

Mechanical behaviour of PMMA: Influence of temperature and confining pressure p. 1103

M. Nasraoui, P. Forquin, L. Siad, A. Rusinek and E. Dossou

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009154

• PDF (919.3 KB)

The effect of impact compaction on surface quality of powder discs p. 1109

P. Jonsén, H. Häggblad and M. Nishida

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009155

• PDF (376.7 KB)

Adiabatic shear localization of different steels at high strain rates p. 1117

W.S. Lee, C.Y. Liu and T.H. Chen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009156

• PDF (1.171 MB)

Dynamic tensile behavior of Al-6Mg alloy with three treatment states p. 1125

M. Lin, B. Pang and W. Zhang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009157

• PDF (1.243 MB)

High rate mechanical properties of Dyneema in compression p. 1133

S.M. Walley, D.J. Chapman, D.M. Williamson, M.J. Morley, T.W. Fairhead and W.G. Proud

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009158

• PDF (1.067 MB)

Detonation synthesis nanodiamonds for reinforcing metal matrix composite coatings operated under shock load p. 1139

V.A. Popov, L.S. Belevsky, A.L. Chuvilin, U. Kaiser, I.I. Khodos, A.S. Prosviryakov and M.N. Kovalchuk

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009159

• PDF (1.698 MB)

Comparison of low and high strain rate deformation mechanisms and texture evolution for a textured Ti6Al4V alloy p. 1145

F. Coghe, W. Tirry, L. Rabet and P. Van Houtte

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009160

• PDF (780.4 KB)

Strain rate dependence of a super-elastic NiTi alloy p. 1153

C.R. Siviour, J.E. Huber, T. Normanton and N. Petrinic

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009161

• PDF (367.0 KB)

Strain rate effects on the mechanical properties of high-purity α-titanium p. 1161

M.E. Nixon, O. Cazacu and J. House

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009162

• PDF (796.9 KB)

Dynamic damping properties of thermoplastic elastomers based on EVA and recycled ground tire rubber p. 1167

N. Roche, A. Chettah, M. Ichchou and M. Salvia

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009163

• PDF (686.7 KB)

Mechanical behavior of three dimension braided carbon/epoxy composite p. 1173

G. Lu, Z. Guoquan, C. Fan, Z. Shanyuan and J. Yang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009164

• PDF (503.0 KB)

Influence of porosity on spallation behavior of pure aluminum under impact loading p. 1179

Y.G. Wang and H.L. He

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009165

• PDF (372.1 KB)

Connection of aluminum samples using gapless scheme in supersonic regime of shock-wave loading p. 1185

O. Drennov and A. Mikhaylov

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009166

• PDF (511.9 KB)

Shock properties of Nd₂Fe₁₄B material and design for shock-driven pulsed power source p. 1189

M. Chuan-Min, S. Shang-Chun, L. Qiao-yan, H. Hong-Liang, Z. Wen-Jun and Z. Feng

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009167

• PDF (598.5 KB)

Mechanical behavior of ultrafine grained OFHC Cu at high strain rates p. 1195

L.J. Park, H.W. Kim, C.S. Lee and K.-T. Park

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009168

• PDF (476.6 KB)

Formation of bulk nanostructure metals under dynamic loading p. 1201

E.V. Shorokhov, I.N. Zhgilev, V.I. Zeldovich, I.G. Brodova, I.V. Khomskaya, A.V. Abramov, I.V. Minaev, N.Yu. Frolova, N.E. Zababakhin, N.P. Oglezneva et al. (2 more)

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009169

• PDF (434.0 KB)

Nondestructive evaluation of spall damage under repeated impact with ultrasonic method p. 1209

N. Nishimura, K. Murase and T. Ito

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009170

• PDF (705.5 KB)

Impact damage in concrete targets subjected to perforation of high velocity metallic fragment p. 1215

A. Arias, P. Forquin and R. Zaera

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009171

• PDF (744.1 KB)

Dynamic mechanical properties and failure mechanism of 50vol%SiCp/2024Al composites p. 1223

Y.W. Wang, F.C. Wang, X.D. Yu, C.Y. Wang and Z. Ma

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009172

• PDF (1.221 MB)

Modeling Bauschingher's effect in planar impact p. 1231

Y. Partom

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009173

• PDF (397.9 KB)

Formulation of a new constitutive equation available simultaneously for static and dynamic loadings p. 1239

A. Gavrus

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009174

• PDF (188.3 KB)

The use of symmetric Taylor impact to validate constitutive models for an fcc metal (copper) and a bcc alloy (RHA steel) p. 1245

L.C. Forde, S.M. Walley, M. Peyton-Jones, W.G. Proud, I.G. Cullis and P.D. Church

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009175

• PDF (679.4 KB)

Strain-rate – temperature superposition behavior of Polymethylene Diisocyanate (PMDI) based rigid Polyurethane foams with different densities p. 1251

B. Song, W.-Y. Lu and W. Chen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009176

• PDF (341.1 KB)

Thermodynamics-based evaluation of the plastic work induced heating. Consequences on the dynamic localization conditions p. 1257

P. Longère and A. Dragon

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009177

• PDF (303.1 KB)

Development of a strain-rate dependent progressive damage model for crash analysis of composite laminates p. 1263

M.M. Shokrieh and M.O. Jamal

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009178

• PDF (412.8 KB)

Determination of damage parameters without numerical simulation using various shock experiments. The lead example p. 1271

C. Bolis, J. Dequiedt, J. Servas, C. Voltz, N. Cordier and D. Sihachakr

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009179

• PDF (331.3 KB)

Molecular dynamic simulation of thermodynamic and mechanical properties and behaviour of Be when high-rate straining p. 1277

V. Dremov, A. Karavaev, F. Sapozhnikov, M. Vorobyova, I. Derbenev and L. Soulard

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009180

• PDF (1.087 MB)

Advanced constitutive relations for steel alloys: Strain hardening and phase transformation effects p. 1285

A. Rusinek, J.R. Klepaczko, J.A. Rodríguez-Martínez and A. Arias

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009181

• PDF (283.2 KB)

Predictions from the equation of state of cerium yield interesting insights into experimental results p. 1291

F.J. Cherne, B.J. Jensen, P.A. Rigg and V.M. Elkin

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009182

• PDF (317.3 KB)

A probabilistic model for the ductile spalling of tantalum p. 1295

H. Trumel, F. Hild, G. Roy, Y.-P. Pellegrini and C. Denoual

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009183

• PDF (257.3 KB)

Flow and failure behaviour of materials at high strain rates p. 1303

E. El-Magd

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009184

• PDF (736.8 KB)

Failure and fragmentation of alumina cylinders under compressive loading p. 1311

F. Zhou and Y. Wang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009185

• PDF (441.2 KB)

Equation of state of ductile granular materials p. 1317

R.G. Kraus, D.J. Chapman, P.D. Church, P. Gould, I.G. Cullis, R. Cornish and W.G. Proud

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009186

• PDF (439.9 KB)

Unconfined compressive strength is a poor indicator of the high-pressure mechanical response of concrete p. 1325

Y. Malecot, X.H. Vu and L. Daudeville

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009187

• PDF (426.2 KB)

Shear modulus of LY12 aluminum alloy under shock loadings and quasi-elastic unloading and the constitutive relations p. 1333

T. Hua, Y. Yuying, H. Jianbo and D. Chengda

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009188

• PDF (289.7 KB)

A modified analytic model of the shear modulus p. 1339

R. Hou, J. Peng, J. Zhang, M. Tu, X. Cui and Y. Wang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009189

• PDF (198.0 KB)

A systematic investigation of the compressive behaviour of near equi-atomic NiTi over a range of strain rates and temperatures p. 1345

A. Patman and G.M. Swallowe

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009190

• PDF (585.6 KB)

Sound velocity measurement of LY12 Al alloy under tensile stress p. 1353

J. Hu, C. Dai, Y. Yu and H. Tan

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009191

• PDF (356.3 KB)

Dynamic tensile behavior of Neapolitan Yellow Tuff p. 1359

D. Asprone, E. Cadoni, A. Prota and G. Manfredi

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009192

• PDF (221.5 KB)

Thermo-mechanical model identification of a strengthened copper with an inverse method p. 1367

M. Peroni, L. Peroni and A. Dallocchio

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009193

• PDF (513.3 KB)

Parameters determination of constitutive models for a low alloy structural steel S355K2G3 p. 1375

J. Mespoulet, A. Lachaud and P. Hereil

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009194

• PDF (434.8 KB)

Advanced experimental investigation and numerical simulation of polycarbonate behaviour at different strain-rate and temperature p. 1383

M. Peroni, L. Peroni and M. Avalle

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009195

• PDF (396.9 KB)

On the universal behavior of some organic compounds under compression p. 1391

B.A. Nadykto

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009196

• PDF (207.0 KB)

The dynamic compressible and shear responses of reactive materials-PTFE/Al p. 1399

P. Zhao, F. Lu, J. Li, Y. Lin, R. Chen, S. Xu and S. Yang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009197

• PDF (526.9 KB)

A viscoplastic constitutive model for polymeric materials at finite deformations p. 1407

L.J. Shen and L.M. Yang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009198

• PDF (166.6 KB)

A new constitutive model to study the propagation of thermal shock wave induced by electron beam radiating in Al alloy p. 1413

H. Chen, W. Tang, R. Zhang and X. Ran

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009199

• PDF (135.3 KB)

The HJC model parameters of an asphalt mixture p. 1419

W.-H. Tang, Y.-Q. Ding and X.-Y. Yuan

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009200

• PDF (347.8 KB)

Experimental research and the parameter global optimization with GAs method of phenolic resin p. 1425

G. Zhang, M. Xu, R. Zhang, X. Zhou and W. Tang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009201

• PDF (228.6 KB)

Constitutive behavior of magnesium alloy sheet at high strain rates p. 1431

D. Hasenpouth, C. Salisbury, A. Bardelcik and M.J. Worswick

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009202

• PDF (325.4 KB)

Flow stress of lead-free solder alloys over a broad range of temperatures and strain rates p. 1437

T. Chen, X.Y. Niu, Z.G. Li and X.F. Shu

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009203

• PDF (581.6 KB)

Flow stress peaks at high strain rates in PMMA p. 1443

H.H. Forrester and G.M. Swallowe

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009204

• PDF (500.1 KB)

Instantaneous strain rate sensitivity of metastable austenitic stainless steel p. 1449

M. Isakov, V.-T. Kuokkala and R. Ruoppa

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009205

• PDF (201.8 KB)

Inverse identification of the constitutive equation parameters from cutting tests using nonparametric models and FEM techniques p. 1457

A. Muñoz-Sánchez, I. González, H. Miguélez and J.A. Canteli

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009206

• PDF (463.9 KB)

Experimental and numerical analysis of high strain rate response of Ti-6Al-4V titanium alloy p. 1465

A. Bragov, A. Konstantinov, A. Lomunov, I. Sergeichev and B. Fedulov

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009207

• PDF (399.3 KB)

Meteorite impact shatter cones – adiabatic shear bands? p. 1471

E. Dawson

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009208

• PDF (304.9 KB)

Coupling discrete elements with shell finite elements to simulate impacts on reinforced concrete structures p. 1479

J. Rousseau, P. Marin, L. Daudeville and S. Potapov

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009209

• PDF (570.7 KB)

Dynamic Eulerian modeling of visco-plastic crystals p. 1485

O. Cazacu and I.R. Ionescu

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009210

• PDF (328.4 KB)

Implicit 2D numerical simulation of materials submitted to high strain rates including fracture p. 1491

P.-P. Jeunechamps and J.-P. Ponthot

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009211

• PDF (605.7 KB)

Large-scale molecular dynamics simulations of particulate ejection and Richtmyer-Meshkov instability development in shocked copper p. 1499

T.C. Germann, G. Dimonte, J.E. Hammerberg, K. Kadau, J. Quenneville and M.B. Zellner

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009212

• PDF (711.8 KB)

Safety assessment of solid rocket motors under impact loading p. 1507

N. Couroneau, Y. Garcia and O. Cauchois

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009213

• PDF (1.092 MB)

Predicting deformation and fracture initiation of steel panels subjected to close-in explosions p. 1515

J.M. Luyten and M.D. Tyler-street

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009214

• PDF (705.2 KB)

Modeling of the fragmentation by Discrete Element Method p. 1523

C. Mariotti, V. Michaut and J.F. Molinari

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009215

• PDF (235.2 KB)

State based peridynamic modeling of dynamic fracture p. 1529

J.T. Foster, S.A. Silling and W.W. Chen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009216

• PDF (478.6 KB)

Polymer plates subjected to impact: Experimental tests and numerical simulations p. 1537

A.H. Clausen, M. Polanco-Loria, R.T. Moura, M. Alves, T. Berstad, M. Langseth and O.S. Hopperstad

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009217

• PDF (329.7 KB)

The effect of water content on the shock compaction of sand p. 1545

J.P. Borg and T.J. Vogler

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009218

• PDF (667.0 KB)

Simulation of laminated glass loaded by air blast waves p. 1553

M. Larcher

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009219

• PDF (535.3 KB)

Numerical investigation of the bodywork effect (K-effect) p. 1561

N. Nsiampa, F. Coghe and G. Dyckmans

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009220

• PDF (558.3 KB)

Dynamic delamination mpodeling using cohesive finite elements p. 1567

M. Ilyas, Ch. Espinosa, F. Lachaud and M. Salaün

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009221

• PDF (1.194 MB)

Micro-mechanical behavior of Al-MnO₂-Epoxy under shock loading p. 1575

A. Fraser, J.P. Borg, J.L. Jordan and G. Sutherland

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009222

• PDF (842.7 KB)

A finite strain energetic analysis of the hollow sphere problem under hydrostatic loading p. 1583

S. Zambelli, G. Roy, F. Hild, H. Trumel and Y.-P. Pellegrini

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009223

• PDF (354.3 KB)

Influence of flow stress and strain hardening of high strength structural steel on the necking formation under dynamic tension p. 1589

J.A. Rodriguez-Martinez, A. Rusinek and A. Arias

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009224

• PDF (301.6 KB)

Localization in shell expansion in biaxial loading conditions p. 1595

J.L. Dequiedt

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009225

• PDF (581.4 KB)

Simulation of multiple shear-bands in collapsing cylinder experiments p. 1601

Z. Lovinger and Y. Partom

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009226

• PDF (412.8 KB)

Implicit FE simulations of composite dynamic failure p. 1609

G. Deliége, L. Papeleux and J.-P. Ponthot

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009227

• PDF (407.9 KB)

Simple method to determine the temperature of shock compressed metals including free electronic contribution and its application to aluminum and copper p. 1615

X. Ran, Z. Xu and W. Tang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009228

• PDF (130.4 KB)

Numerical simulation study of the strain rate effect on concrete in compression considering material heterogeneity p. 1621

Y. Lu, Z.H. Song and Z.G. Tu

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009229

• PDF (638.8 KB)

Predicting the damage/failure transition in polymer-bonded explosives p. 1629

P.J. Gould, D. Porter and I.G. Cullis

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009230

• PDF (119.3 KB)

Numerical simulation of far-field underwater explosion-induced damage of ship structure p. 1635

A.-G. Geffroy, P. Longère and B. Leblé

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009231

• PDF (1.072 MB)

Numerical analysis of the projectile deformation during the penetration of concrete targets p. 1643

W. Zhang, Z.-C. Mu, Z.-S. Cao and X.-K. Xiao

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009232

• PDF (402.7 KB)

Measuring dynamic strength at low plastic strains using a hat-shaped specimen p. 1649

Z. Lovinger, Y. Ashuach and O. Firstenberg

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009233

• PDF (755.1 KB)

On determination of spall strength under dynamic tensile loading p. 1657

P. Xiao-Yang, L. Ping and H. Hong-Liang

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009234

• PDF (198.4 KB)

Modeling of high temperature Hopkinson tests on AA5083 and Ti6Al4V p. 1663

L. Berkovic, R. Ryckaert, A. Chabotier, L. Gilson, F. Coghe and L. Rabet

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009235

• PDF (691.3 KB)

Numerical simulation about dynamic bond-slip between reinforcing steel bar and concrete p. 1669

H. Wu, Y. Lu, F. Huang and Z. Zhou

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009236

• PDF (893.6 KB)

Experimental and numerical study of pultruded composite tubes under blast loading p. 1677

D.A. Kakogiannis, D. Van Hemelrijck, J. Wastiels, J. Van Ackeren, S. Palanivelu, W. Van Paepegem, J. Vantomme, G.N. Nurick and S.C. Kim Yuen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009237

• PDF (441.8 KB)

Numerical simulations of SHPB tests using 921A steel pure shear hat-shaped specimens p. 1685

J.C. Li, X.W. Chen and G. Chen

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009238

• PDF (747.7 KB)

Demonstration of survivable space penetrator p. 1693

P. Church, W. Huntington-Thresher, A. Bruce, N. Penny, A. Smith and R. Gowan

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009239

• PDF (421.1 KB)

Numerical simulation on penetration of rod projectile into YB-AD90 ceramic- composite target p. 1699

Z.F. Sun, P. Li, H. Xu, H.L. He, Q.Z. Li, J.X. Peng and D.H. Li

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009240

• PDF (306.5 KB)

Numerical procedure for the prediction of projectile residual velocity for impact on mild steel plates p. 1707

R. Munusamy, A. Deb and D. C. Barton

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009241

• PDF (267.9 KB)

Experimental & numerical studies on ballistic impact of armour steel by armour piercing projectiles p. 1715

A. Banerjee and N. Nayak

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009242

• PDF (1011 KB)

Molecular instability at the shear-stress interface p. 1723

M.M. Kuklja and S.N. Rashkeev

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009243

• PDF (524.7 KB)

Numerical analysis of the influence of cutting speed in machined induced residual stresses in aero-engine alloys p. 1729

H. Miguélez, R. Zaera, R. Cheriguene and A. Molinari

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009244

• PDF (227.7 KB)

Numerical simulation of wave propagation in cracked shafts p. 1737

L. Rubio, B. Muñoz-Abella and G. Loaiza

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009245

• PDF (742.5 KB)

Response of bonded assembly under shock wave loading p. 1745

D. Laporte, F. Malaise, P.-L. Hereil, E. Buzaud and J.-M. Chevalier

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009246

• PDF (540.9 KB)

Penetration of a plastically-deforming target by slender projectiles p. 1753

V.P.W. Shim, Y.B. Guo, L.C. Boey and B.P. Lim

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009247

• PDF (259.4 KB)

Ballistic performance of laminated composites against military impactors: Experimental and numerical studies p. 1761

N. Nayak, A. Banerjee and A.L. Dutta

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009248

• PDF (450.4 KB)

Finite element analysis of Charpy tests on extruded aluminium alloys p. 1767

Y. Chen, O.S. Hopperstad, A.H. Clausen, T. Børvik and T. Berstad

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009249

• PDF (845.4 KB)

Evidence recovery from the post impact characterization of a Full Metal Jacket 9 mm Parabellum bullet p. 1775

F. Bresson, C. Marechal, O. Franck and P. Drazetic

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009250

• PDF (525.9 KB)

Response of layered structures to buried charge explosion p. 1783

J. Buchar and S. Rolc

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009251

• PDF (611.0 KB)

Cluster dynamics method for simulation of dynamic processes of continuum mechanics p. 1789

V.N. Piskunov, I.A. Davydov, R.A. Veselov, B.L. Voronin, D.A. Demin, A.M. Petrov, N.V. Nevmerzhitskiy and V.N. Sofronov

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009252

• PDF (308.4 KB)

Experimental and numerical study of high velocity impacts on carbon/epoxy laminates p. 1799

D. Varas, J. López-Puente and R. Zaera

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009253

• PDF (588.5 KB)

Modelling of the failure of carbon-fibre laminates subjected to dynamic loads p. 1807

S. Sanchez-Saez, J. Lopez-Puente, E. Barbero and C. Navarro

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009254

• PDF (577.9 KB)

Dynamic behavior of reinforced concrete (RC) structures subjected to inside explosion of metal cased TNT p. 1815

Y. Nakayama, T. Homae, D. Takagaki, T. Matsumura, K. Wakabayashi, K. Ishikawa and M. Iida

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009255

• PDF (864.1 KB)

The influence of tool wear in surface integrity when machining austenitic stainless steel p. 1823

A. Muñoz-Sánchez, H. Miguélez, J.A. Canteli and J.L. Cantero

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009256

• PDF (661.0 KB)

Numerical simulation of dynamic four-bending-tests using a modified Split Hopkinson Pressure Bar p. 1831

J.A. Loya, L. Rubio and J. Fernández-Sáez

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009257

• PDF (380.0 KB)

Determination of the constants of material models by optimization and numerical simulation p. 1839

G.H. Majzoobi, S. Khosroshahi and H. Beikmohahhadloo

Published online: 15 September 2009

DOI: https://doi.org/10.1051/dymat/2009258

• PDF (875.7 KB)