Progress towards materials science above 1000 GPa (10 Mbar) on the NIF laser p. 3 B.A. Remington, H.-S. Park, S.T. Prisbrey, S.M. Pollaine, R.M. Cavallo, R.E. Rudd, K.T. Lorenz, R.C. Becker, J.V. Bernier, N.R. Barton et al. (5 more) Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009001 AbstractPDF (1.267 MB)
Experimental and numerical analysis on dry and saturated concrete behaviour under high pressure confinement p. 11 C. Pontiroli, Y. Malécot, X.H. Vu, L. Daudeville, E. Buzaud and A. Rouquand Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009002 AbstractPDF (541.0 KB)
Static and dynamic mechanical properties of epoxy-based multi-constituent particulate composites p. 19 J.L. Jordan, B. White, J.E. Spowart, N.N. Thadhani and D.W. Richards Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009003 AbstractPDF (230.0 KB)
Dynamic response of Sn over the temperature range 115–503 K p. 27 E.B. Zaretsky and G.I. Kanel Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009004 AbstractPDF (226.4 KB)
Novel pure-shear sheet specimen geometry for dynamic material characterisation p. 35 J. Peirs, P. Verleysen, W. Van Paepegem and J. Degrieck Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009005 AbstractPDF (1.365 MB)
Studies on high strain-rate behavior of materials by using a new method combining HPB technique with Lagrangian analysis p. 43 L. Wang, H. Lai and J. Zhu Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009006 AbstractPDF (277.8 KB)
Damage of multilayered surface by micro-jet impact of liquid metal p. 51 M. Futakawa, T. Naoe, M. Kawai, T. Wakui and H. Kogawa Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009007 AbstractPDF (854.9 KB)
Dynamic behaviour of granular materials at impact p. 59 J. Addiss, A. Collins, F. Bobaru, K. Promratana and W.G. Proud Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009008 AbstractPDF (941.4 KB)
Static and dynamic confined compression of Borosilicate glass p. 67 S. Chocron, K.A. Dannemann, J.D. Walker, A.E. Nicholls and C.E. Anderson Jr. Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009009 AbstractPDF (612.8 KB)
Experimental and numerical investigations on the behavior of steel plates and structures under impact loading p. 73 L.W. Meyer, T. Halle and S. Abdel-Malek Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009010 AbstractPDF (1.005 MB)
Accounting for the effect of local punching at the bar/specimen interface in SHPB experiments p. 81 K. Safa and G. Gary Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009011 AbstractPDF (389.0 KB)
Influence of shockwave profile on ejection of micron-scale material from shocked Sn surfaces: An experimental study p. 89 M.B. Zellner, M. Byers, G. Dimonte, J.E. Hammerberg, T.C. Germann, P.A. Rigg and W.T. Buttler Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009012 AbstractPDF (546.3 KB)
The rate dependency of concrete in tension – New data for wet, normal and dry conditions p. 95 J. Weerheijm, I. Vegt and K. van Breugel Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009013 AbstractPDF (1.144 MB)
The instrumented dynamic perforation test applied to a composite shell p. 103 S. Pattofatto, H. Tsitsiris and H. Zhao Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009014 AbstractPDF (948.2 KB)
Phase transitions detection using in situ ellipsometry measurements p. 111 L. Bakshi, S. Eliezer, N. Nissim, L. Perelmutter, M. Sudai and M. Mond Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009015 AbstractPDF (312.2 KB)
The response of silicon carbide and boron carbide subjected to shock-release-reshock plate-impact experiments p. 119 T.J. Holmquist and T.J. Vogler Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009016 AbstractPDF (467.2 KB)
Accurate measurement of stress–strain relation under high strain rate condition by using non-coaxial Hopkinson bar method p. 127 T. Umeda and K. Mimura Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009017 AbstractPDF (1.057 MB)
Dynamic behaviour of Advanced High Strength Steels used in the automobile structures p. 135 E. Cadoni, F. D'Aiuto and C. Albertini Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009018 AbstractPDF (612.3 KB)
Dynamic punch test p. 143 A. Gilat and J.D. Seidt Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009019 AbstractPDF (870.0 KB)
Development of a multi-section striker for split Hopkinson bar experiments and numerical simulations p. 149 A. Bouamoul, M. Bolduc and R. Arsenault Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009020 AbstractPDF (578.1 KB)
Dynamic compressive behavior of a 45 vol.% SiCp/2024Al composite at various high strain rates p. 155 Y. Zhu, B. Pang, B. Gai, L. Wang and W. Zhang Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009021 AbstractPDF (928.3 KB)
Spallation and microjetting in laser-shock-loaded aluminium and gold p. 163 E. Lescoute, T. De Rességuier, J.-M. Chevalier, M. Boustie, L. Berthe and J.-P. Cuq-Lelandais Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009022 AbstractPDF (815.4 KB)
Influence of necking propensity on the dynamic-tensile-extrusion response of fluoropolymers p. 171 E.N. Brown, G.T. Gray III and C.P. Trujillo Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009023 AbstractPDF (677.3 KB)
Temperature and emissivity measurement in dynamic experiments using an advanced infrared detector array technique p. 179 I. Negreanu, G. Gary and D. Mohr Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009024 AbstractPDF (520.9 KB)
Characterisation of unidirectional Carbon-Epoxy IM7-8552 in longitudinal compression under high strain rates p. 185 H. Körber and P.P. Camanho Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009025 AbstractPDF (638.6 KB)
Strain rate dependence of Ti64: Characterisation of mechanical properties up to failure using novel optical techniques p. 193 M. Arthington, C. Siviour, N. Petrinic and B. Elliott Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009026 AbstractPDF (635.6 KB)
Response of moist sand to high rate loading p. 201 B. Martin and W. Chen Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009027 AbstractPDF (342.2 KB)
A high-explosive driven experiment to compare the reflected Hugoniot and the release adiabat curves of Ti-6Al-4V alloy from a 52 GPa shock state p. 207 A. Sollier, V. Bouyer, J.-B. Maillet and C. Voltz Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009028 AbstractPDF (533.1 KB)
Dynamic tests on a cohesive and frictional material. Influence of high pressure and high strain rate on compaction and shear p. 213 P. Bailly, F. Delvare, M. Biessy and D. Picart Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009029 AbstractPDF (283.3 KB)
Experimental characterisation of the strain rate dependent failure and damage behaviour of 3D composites p. 219 R. Gerlach, C.R. Siviour, N. Petrinic and J. Wiegand Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009030 AbstractPDF (622.6 KB)
Experimental investigations of the dynamic behaviour of a low alloy structural steel S355K2G3 p. 227 A. Lachaud, P. Hereil and J. Mespoulet Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009031 AbstractPDF (362.0 KB)
Impact tensile test: A new type of crash test for welded joints used in automotive applications p. 235 E. Bayraktar, J. Chevalier, F. Bonnet, D. Kaplan and J. Claeys Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009032 AbstractPDF (437.8 KB)
Impact friction test for friction materials p. 243 J. Li, F. Lu, P. Zhao, R. Chen and Y. Lin Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009033 AbstractPDF (446.1 KB)
A new technique for compression tests at intermediate strain rates: Prototype results p. 249 T.J. Cloete and S. Oxtoby Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009034 AbstractPDF (503.5 KB)
Taylor impact experiments on Ti-6Al-4V specimens using 3D geometry reconstruction and instrumented target rods p. 257 E. Wielewski, C.R. Siviour, N. Petrinic, M.R. Arthington and S. Carter Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009035 AbstractPDF (419.3 KB)
A method to calibrate a specimen with strain gauges to measure force over the full-force range in high rate testing p. 265 P.K.C. Wood, C.A. Schley, M. Williams, R. Beaumont, A. Rusinek, U. Mayer and A. Pearce Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009036 AbstractPDF (563.4 KB)
Determination of dynamic shear stress – Strain relationship in adhesively bonded assemblies p. 275 G. Challita, R. Othman, J.M. Lebrun, P. Casari and P. Guégan Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009038 AbstractPDF (347.8 KB)
High speed blanking: An experimental method to calculate the induced cutting forces p. 281 C. Gaudillière, N. Ranc, A. Larue and P. Lorong Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009039 AbstractPDF (739.3 KB)
New heterodyne velocimeter and shock physics p. 289 J. Bénier, P. Mercier, E. Dubreuil, J. Veaux and P.A. Frugier Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009040 AbstractPDF (1.106 MB)
Full-field strain measurements at high rate on notched composites tested with a tensile Hopkinson bar p. 295 R. Moulart, F. Pierron, S.R. Hallett and M.R. Wisnom Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009041 AbstractPDF (908.7 KB)
Dynamic compressive properties of nickel-based honeycomb sandwich and two-layered sandwich p. 303 Z.Q. Yang, B.J. Pang, J.Y. Shi, L.W. Wang and R.Q. Chi Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009042 AbstractPDF (1.057 MB)
Analysis of temperature measurement at material/LiF interface under moderate shock wave compression p. 311 C. Chauvin, J. Petit, P.-L. Héreil and M. Boustie Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009043 AbstractPDF (867.3 KB)
On the perforation process of 2024-T3 aluminium sheets subjected to low impact velocity: Effects of friction condition and initial temperature p. 319 J.A. Rodriguez-Martinez, A. Rusinek, A. Arias and E. Dossou Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009044 AbstractPDF (653.0 KB)
Dynamic tensile fragmentations of Al2O3 rings under radial expansion loading p. 325 F.H. Zhou and Y.G. Wang Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009045 AbstractPDF (385.0 KB)
A comparison of the quasistatic and dynamic compressibilities of wet and dry vermiculite p. 331 S.M. Walley and W.G. Proud Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009046 AbstractPDF (970.1 KB)
The derivation of material parameters from measurements of blow-off impulse and stress induced by electron beam p. 337 W.-H. Tang, H. Chen and X.-W. Ran Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009047 AbstractPDF (109.3 KB)
Intermediate strain rate characterization of a plastic-bonded explosive composition p. 343 D. Picart, M. Biessy and J.L. Brigolle Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009048 AbstractPDF (541.8 KB)
Response of the Edam cheese to impact loading p. 349 J. Buchar, S. Nedomova and L. Severa Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009049 AbstractPDF (751.5 KB)
Dynamic optical technique applied to define the zone of 3D and transient effects during dynamic crack propagations p. 355 S. Hedan, V. Valle and M. Cottron Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009050 AbstractPDF (593.6 KB)
Dynamic compression testing by means of Charpy pendulum p. 363 J. Dzugan and V. Mentl Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009051 AbstractPDF (96.20 KB)
Development of an experimental device for low velocity impacts on energetic material p. 367 P. Mateille, S. Coussy, L. Daridon, O. Arnould, A. Fanget and E. Lapebie Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009052 AbstractPDF (884.1 KB)
Validation of digital image correlation technique for impact loading applications p. 373 S. Palanivelu, S. De Pauw, W. Van Paepegem, J. Degrieck, J. Van Ackeren, D. Kakogiannis, J. Wastiels, D. Van Hemelrijck and J. Vantomme Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009053 AbstractPDF (692.0 KB)
A hydro-pneumatic machine for intermediate strain-rates: Set-up, tests and numerical simulations p. 381 V. Tarigopula, C. Albertini, M. Langseth, O.S. Hopperstad and A.H. Clausen Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009054 AbstractPDF (504.9 KB)
A modified Hopkinson bar system for testing ultra-soft materials under intermediate strain rates p. 389 R. Chen, S. Huang, K. Xia and F. Lu Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009055 AbstractPDF (367.5 KB)
Study of adiabatic localized shear in metals by split Hopkinson pressure bar method p. 395 V. Pushkov, A. Yurlov, A. Bol'shakov, A. Podurets, A. Kal'manov and E. Koshatova Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009056 AbstractPDF (338.1 KB)
Strength and failure of planar ampoules in shock-wave tests p. 401 O. Drennov, A. Mikhaylov, R. Osipov and A. Fedorov Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009057 AbstractPDF (688.9 KB)
Dynamic fracture initiation toughness of high strength steel alloys p. 407 J.T. Foster, W.W. Chen and V.K. Luk Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009058 AbstractPDF (167.9 KB)
Out-of-plane behavior of honeycombs under dynamic combined compressive and shear loading p. 413 B. Hou, A. Ono, S. Abdennadher, Y.L. Li, S. Pattofatto and H. Zhao Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009059 AbstractPDF (631.0 KB)
Experimental and numerical studies of cylindrical projectile high-velocity impact on steel targets in water p. 421 Z. Guo, X. Xiao, W. Zhang and Z. Mu Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009060 AbstractPDF (432.5 KB)
High energy absorption of warp interlock fabrics: Application to high speed impact of fragments p. 429 M. Lefebvre and F. Boussu Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009061 AbstractPDF (495.6 KB)
Pseudo-inverse method for the identification of non-homogeneous stress field in dynamic experiments p. 437 S. Aloui, R. Othman, E. Verron, P. Guégan and A. Poitou Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009062 AbstractPDF (262.1 KB)
Dynamic deformation of aluminum alloys at high temperature by using SHPB techniques p. 443 O.S. Lee, S.W. Hwang, H.B. Choi, D.H. Kim and H.M. Kim Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009063 AbstractPDF (749.2 KB)
High strain rate delamination of glass fibre reinforced polymers using a Hopkinson bar configured for spalling p. 449 R. Govender, L. Louca, A. Pullen and G. Nurick Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009064 AbstractPDF (428.2 KB)
An electrical pulse-heated Kolsky bar technique for high strain rate flow stress measurements of rapidly heated metals p. 457 S.P. Mates, S. Banovic, R. Rhorer, T. Burns, E. Whitenton and D. Basak Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009065 AbstractPDF (487.7 KB)
Effect of projectile type and impact velocity on the ballistic impact failure of TROGAMID® CX-7323 Nylon: Experiment and simulation p. 463 N. Tsantinis, J.W. Song and R. Paulson Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009066 AbstractPDF (675.3 KB)
Experimental study of the behaviour of building structural elements under soft impact p. 471 P. Bailly, F. Delvare and J.L. Hanus Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009067 AbstractPDF (461.3 KB)
Testing the impact tensile properties of ceramics with SHPB p. 479 L. Song, L.M. Yang and F.L. Huang Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009068 AbstractPDF (436.8 KB)
Theoretical assessment of stress-strain curve estimates in Split Hopkinson Bar experiments p. 485 D. Mohr, G. Gary and B. Lundberg Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009069 AbstractPDF (236.2 KB)
Influence of pulsed electric current treatment on strength of reinforcing steel and its welds under impact loading p. 491 L. Kruszka, G. Stepanov, V. Zubov and A. Babutski Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009070 AbstractPDF (273.9 KB)
Dynamic mechanical behaviour of polyethylene p. 497 R.T. Moura, A.H. Clausen, M. Langseth and M. Alves Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009071 AbstractPDF (448.7 KB)
A study of dynamic behavior of the autoclaved aerated concrete p. 503 R. Belouettar and J.R. Klepaczko Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009072 AbstractPDF (557.5 KB)
The dynamic temperature measurement of split Hopkinson bar specimens using small thermocouples and infrared streak photography p. 511 S.M. Walley, W.G. Proud, P.J. Rae and J.E. Field Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009073 AbstractPDF (220.4 KB)
An experimental study on dynamic constitutive model of clay under multiaxial compression p. 517 S. Jing, F. Lu, Y. Lin and R. Chen Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009074 AbstractPDF (421.3 KB)
Development of normalized impact test of rubber projectiles on laminate composite panels p. 525 P. Guégan, R. Othman, D. Lebreton, F. Pasco, N. Swiergiel, P. Thevenet, B. Malherbe and J. Maffre Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009075 AbstractPDF (1.059 MB)
Optical observations and numerical simulations on the evolution of ASB in structural steel p. 531 S. Chen, C. Huang, T. Lan, Y. Zhang and G. Ni Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009076 AbstractPDF (1.281 MB)
A new validation test of the constitutive equations: Cylindrical implosion from explosive p. 539 J.M. Servas and E. Martinez Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009077 AbstractPDF (697.5 KB)
Impact behaviour of hollow sphere agglomerates with density gradient p. 547 H.B. Zeng, S. Pattofatto, H. Zhao, Y. Girard and V. Fascio Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009078 AbstractPDF (529.9 KB)
Polymeric foam behaviour under static and dynamic loadings – Effect of the gas entrapped in the porous structure p. 555 D. Egurreguy and P. Viot Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009079 AbstractPDF (721.4 KB)
Damage mechanism in high hardness armor (HHA) steel subjected to V50 ballistic impact p. 563 A.G. Odeshi, M.N. Bassim and M. Bolduc Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009080 AbstractPDF (1.039 MB)
Characterisation of shock-absorbing components under impact loading p. 569 K. Müller, T. Quercetti and A. Musolff Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009081 AbstractPDF (497.5 KB)
Fracture behavior of a Zr-metallic glass under dynamic compression p. 575 Z. Ling, J.X. Meng, M.Q. Jiang and L.H. Dai Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009082 AbstractPDF (686.7 KB)
A new split Hopkinson pressure-shear testing set p. 583 Lin Yuliang, Lu Fangyun, Zhao Pengduo, Li Junling and Cui Yunxiao Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009083 AbstractPDF (282.9 KB)
Study of stress wave propagation in SHPB with NHDMOC p. 591 M. Xu, G. Zhang, Q. Cai, R. Zhang and W. Tang Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009084 AbstractPDF (225.1 KB)
High strain rate bulge testing of a DP450 steel using a nylon SHPB system p. 597 V. Grolleau, D. Mohr, A. Penin, G. Gary and B. Galpin Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009085 AbstractPDF (598.3 KB)
Tensile strength of dried mortar over a wide range of strain rate p. 603 B. Erzar, E. Buzaud, P. Forquin and C. Pontiroli Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009086 AbstractPDF (544.1 KB)
The correction for using X-cut quartz transducers in SHPB p. 611 P. Zhao, Y. Lin, F. Lu, J. Li, R. Chen and G. Sun Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009087 AbstractPDF (285.0 KB)
Experimental definition of dynamic friction p. 619 A. Bragov, A. Konstantinov, A. Lomunov, Yu. Shmotin and L. Kruszka Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009088 AbstractPDF (493.8 KB)
Two-dimensional investigation of laser shock induced spallation in sub-picosecond regime p. 625 J.-P. Cuq-Lelandais, M. Boustie, L. Berthe, P. Combis, A. Sollier, T. De Resseguier, E. Lescoute, E. Gay, L. Soulard and J. Bontaz-Carion Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009089 AbstractPDF (534.6 KB)
Study on the behavior of plain and steel fiber reinforce concrete to a dynamic tensile loading p. 633 X.L. Dong, Z.Q. Hong, S.L. Zhang, J.Y. Chen and L. Wang Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009090 AbstractPDF (246.6 KB)
Impact compressive failure of a unidirectional carbon/epoxy laminated composite in three principal material directions p. 639 T. Yokoyama and K. Nakai Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009091 AbstractPDF (1.254 MB)
Dynamic behavior of UFG aluminum at a wide range of strain rates and temperatures in compression and tension p. 647 J. Kokkonen, V.-T. Kuokkala and M. Isakov Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009092 AbstractPDF (244.0 KB)
Deformation behavior of sleeved polymer core projectiles during Taylor impact p. 655 H.-S. Shin, S.-T. Park and J.-H. Choi Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009093 AbstractPDF (997.0 KB)
Resistance of composite materials and tank structures to the impact and hydraulic ram pressure generated by a ballistic projectile p. 663 E. Deletombe, J. Fabis and J. Dupas Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009094 AbstractPDF (935.5 KB)
Fiber-reinforced ultra-high performance concrete under tensile loads p. 671 O. Millon, W. Riedel, K. Thoma, E. Fehling and M. Nöldgen Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009095 AbstractPDF (428.1 KB)
Ground collisions of high-speed vehicles and soft bodies p. 679 S. Yoshie, M. Sakai, T. Murakami and A. Katayama Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009096 AbstractPDF (519.9 KB)
Dynamic behaviour of laterally loaded pultruted composite beams p. 687 J.A. Epaarachchi and P. Birt Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009097 AbstractPDF (210.4 KB)
Impact behaviour of the high-strength aluminium alloy AA7075-T651 p. 695 T. Børvik, H. Aunehaugen and O.S. Hopperstad Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009098 AbstractPDF (837.1 KB)
Micromechanical approach of the dynamic behavior of a high impact PP and a PP compound: Recycling and pollution effects p. 703 N. Bahlouli, C. Gauthier, J.M. Pelletier and D. Pessey Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009099 AbstractPDF (630.2 KB)
Study of blast load on recyclable empty metal cans p. 709 S. Palanivelu, W. Van Paepegem, J. Degrieck, K. De Wolf, J. Vantomme, D. Kakogiannis, J. Van Ackeren, D. Van Hemelrijck and J. Wastiels Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009100 AbstractPDF (872.1 KB)
Nano nickel strengthened open cell metal foams under quasistatic and dynamic loading p. 717 A. Jung, H. Natter, R. Hempelmann and E. Lach Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009101 AbstractPDF (658.6 KB)
Progressive crushing of a fiber reinforced composite crash-box for a racing car p. 725 S. Boria and G. Forasassi Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009102 AbstractPDF (1.146 MB)
Dynamic tensile properties of mild steel sheets after strain aging p. 733 N. Kojima, K. Mimura and T. Umeda Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009103 AbstractPDF (1.188 MB)
Dynamic elastic buckling loads of slender rods and their dependence on geometrical features of specimens at intermediate impact velocities p. 741 K. Mimura, T. Umeda, I. Riku, M. Yu and Y. Uchida Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009104 AbstractPDF (552.7 KB)
Behaviour of Roma Plastilina upon blunt projectile impact p. 749 R. Munusamy and D.C. Barton Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009105 AbstractPDF (386.5 KB)
Electromagnetic phenomena associated with dynamic deformation and fracture of rocks p. 757 K. Watanabe, K. Ogawa, K. Tanaka, H. Kobayashi and K. Horikawa Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009106 AbstractPDF (670.1 KB)
Influence of the manufacturing process on the self-healing behavior of ionomers p. 765 T. Haase, M. Wicklein and K. Thoma Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009107 AbstractPDF (909.5 KB)
Numerical axial impact study of pultruded circular and square composite tubes p. 771 S. Palanivelu, W. Van Paepegem, J. Degrieck, D. Kakogiannis, J. Van Ackeren, D. Van Hemelrijck, J. Wastiels, K. De Wolf and J. Vantomme Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009108 AbstractPDF (652.9 KB)
Force based analysis on the instrumented Charpy impact and its industrial application p. 779 J. Fang and F.L. Ding Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009109 AbstractPDF (159.0 KB)
Structural response of thin-walled austenitic pipes to radiolysis gas detonations p. 785 S. Offermanns, E. Roos and W. Stadtmüller Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009110 AbstractPDF (358.9 KB)
Static and impact-dynamic characterization and modeling of multiphase TRIP steels p. 793 J. Van Slycken, J. Bouquerel, P. Verleysen, K. Verbeken, J. Degrieck and Y. Houbaert Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009111 AbstractPDF (812.4 KB)
Effect of pre-straining on localisation and fracture of dual-phase steel at elevated rates of strain p. 801 V. Tarigopula, O. Hopperstad, A. Clausen and M. Langseth Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009112 AbstractPDF (659.2 KB)
Rate effects of high performance fibre reinforced cementitius composite under tensile loading p. 809 E. Cadoni, M. Dotta, D. Forni, A. Meda and G.A. Plizzari Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009113 AbstractPDF (471.1 KB)
Effect of cased ammunition explosions on RC structures p. 817 J. Mediavilla, J. Weerheijm, J.C.A.M. van Doormaal and R.M. Rhijnsburger Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009114 AbstractPDF (853.8 KB)
Rigid-plastic seismic design of reinforced concrete structures to multiple earthquake excitations p. 825 F.C. Lin, L.G. Yun and Z.S. Yuan Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009115 AbstractPDF (499.9 KB)
Strain rate dependence of dynamic flow stress of 7075 aluminium alloy at very high strain rates p. 833 K. Sakino Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009116 AbstractPDF (533.9 KB)
About a possible criterion of limiting plasticity of structural metal alloys p. 841 M.A. Syrunin and A.G. Fedorenko Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009117 AbstractPDF (118.0 KB)
Dynamic response of a steel tube to blast p. 847 J. Malachowski Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009118 AbstractPDF (651.5 KB)
Dynamic constitutive relationship of lead-free solder alloys based on Johnson-Cook model with thermal effect p. 855 X.Y. Niu, T. Chen, Z.G. Li and X.F. Shua Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009119 AbstractPDF (563.6 KB)
Mechanical behaviour of Inconel 713LC at different strain rates and high temperatures p. 861 F. Gálvez, N. García, D. Cendón, A. Enfedaque and V. Sánchez-Gálvez Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009120 AbstractPDF (513.4 KB)
Impact behavior and fracture of jointed steel plates p. 867 M. Daimaruya, H. Fujiki and Y. Uemura Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009121 AbstractPDF (808.2 KB)
Hybrid and combined sheet-stamping technologies combining static and dynamic loads p. 875 V. Glushchenkov and F. Grechnikov Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009122 AbstractPDF (1005 KB)
Ballistic performance of dry stacked flax fabrics p. 881 E. Delcourt, L. Gilson, L. Rabet and M. Pirlot Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009123 AbstractPDF (210.9 KB)
Characterization of pressure wave propagation in biological tissues p. 887 M. Benoit, J.H. Giovanola, A. Curnier, K. Agbeviade and M. Donnet Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009124 AbstractPDF (332.5 KB)
Dynamic behavior and microstructural properties of cancellous bone p. 895 S. Laporte, F. David, V. Bousson and S. Pattofatto Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009125 AbstractPDF (324.1 KB)
A tapered striker pulse shaping technique for uniform strain rate dynamic compression of bovine bone p. 901 T.J. Cloete, A. van der Westhuizen, S. Kok and G.N. Nurick Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009126 AbstractPDF (639.2 KB)
Evaluation of dynamic compressive properties of PLA polymer blends using split Hopkinson pressure bar p. 909 M. Nishida, M. Yamaguchi, M. Todo, T. Takayama, H.-Å. Häggblad and P. Jonsén Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009127 AbstractPDF (704.1 KB)
High strain-rate tensile behavior of pig bones p. 917 A. Parish, W. Chen and T. Weerasooriya Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009128 AbstractPDF (320.7 KB)
Possible approach to the formulation of dynamical problems in biomechanics p. 923 J. Suvorova and S. Alexeeva Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009129 AbstractPDF (187.4 KB)
Effect of strain rate on the mechanical properties of biodegradable polymer blends p. 929 S. Kobayashi and S. Ogihara Published online: 15 September 2009 DOI: https://doi.org/10.1051/dymat/2009130 AbstractPDF (1.225 MB)