EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||8|
|Section||Modelling & Numerical Simulation|
|Published online||09 September 2021|
Investigation on Fragmentation of Pyrophoric Alloy Samples during Taylor Test Using SPH
ISL – French German Research Institute of Saint Louis, 68300 Saint Louis, France
2 University of Hertfordshire, School of Computer Science and Engineering, AL109EU Hatfield, UK
Published online: 9 September 2021
This study is the first part of a project that aims to assess and model impact-induced energy release (IIER). The present part of the work investigates the failure mode of brittle commercial pyrophoric alloy samples during Taylor impact tests. A series of ferrocerium specimens were shot against tungsten carbide anvils, with velocities ranging between 60 and 140 m/s. A Total Lagrangian SPH model was employed to simulate the deformation and impact-induced fragmentation of the cylinders using LSDYNA®. The modified Johnson-Cook constitutive model was applied in combination with the Cockcroft-Latham fracture criterion. The plastic deformation process, shear cracking, and fragmentation are well reproduced in the numerical results.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.