EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Experiment and finite element analysis of U-profile subjected to dynamic loading
COMTES FHT a.s.,
2 CTU in Prague, Dept. Mat. Engineering, Karlovo n. 13, Prague 12135, Czech Republic
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
The presented study deals with the FEM simulation of dynamic behaviour of U-profile crash under three point bent loading conditions verified by experimental investigations. The material ductile damage behaviour under wide strain rate region covering 0.001 – 1 000 s-1 was experimentally determined with the use of standard and micro tensile tests (M-TT). DIC systems were used for strain field measurements under quasi-static and dynamic loading conditions. Based on these experimental data, material model considering ductile damage was established in Abaqus/Explicit code. Additionally, also metallographic investigations were performed for the fracture behaviour description.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.