EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Section||Modelling and Numerical Simulation|
|Published online||07 September 2018|
Experimental and Numerical Studies on the Dynamic Behaviors of Concrete Material Based on the Waveform Features in SHPB Test
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology,
2 Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China
3 Institute of Systems Engineering, China Academy of Engineering Physics, Mianyang, Sichuan 621999, China
* Corresponding author : firstname.lastname@example.org
Published online: 7 September 2018
The tendency of the waveform curve can directly reflect the deformation and failure process of specimen in the SHPB (Split Hopkinson Pressure Bar) test of concrete. Different loading rates will result in the different ultimate failure modes, waveform curves. Furthermore, these differences are obviously characterized by some feature points of waveform or stress-strain curves. It is to say for concrete-like damage softening materials, the waveform features contains lots of information of material response. In this study, large dimension (Ф120mm) SHPB tests of concrete specimens have been conducted. Four typical failure patterns of concrete specimens are classified, as well as some typical waveform features, e.g. the “double-peak” and“compression wave” phenomena of reflection wave, etc. On the other hand, the numerical simulations corresponding to the experimental tests are performed by means of the 3D meso-scale model of concrete material. In the numerical results, waveform features observed in experiment are reliably reproduced and predicted. Associating with waveform features, the violation indicator of the specimen stress equilibrium in the SHPB test is first identified for concrete-like damage softening materials. The concrete material behaviors forstress non-equilibrium are further analyzed, e.g. DIF and damage development, etc.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.