EPJ Web of Conferences
Volume 94, 2015DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Published online||07 September 2015|
Strain rate effects on tensile strength of iron green bodies
1 Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Aichi 466-8555, Japan
2 Luleå University of Technology, Division of Mechanics of Solid Materials, SE-97187 Luleå, Sweden
a Corresponding author: firstname.lastname@example.org
Published online: 7 September 2015
Impact tensile strength of iron green bodies with densities of 7.2 and 7.4 g/cm3 was examined by Brazilian test using the split-Hopkinson pressure bar (Kolsky bar) method. The powder material used for the experiments was a press-ready premix containing Distaloy AE, graphite, and lubricant. During dynamic compression, the failure behavior of specimens was observed using a high-speed video camera. The failure stress and failure behavior of dynamic compressive tests were compared with those of static compressive tests.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.