EPJ Web of Conferences
Volume 94, 2015DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||3|
|Published online||07 September 2015|
Investigating strength of materials at very high strain rates using magnetically driven expanding cylinders
1 Rafael- Advanced defence systems, Haifa, Israel
2 Faculty of Mechanical Engineering, Technion – Israel Institute of Technology
3 Solid State Institute and Physics Department, Technion – Israel Institute of Technology
a Corresponding author: firstname.lastname@example.org
Published online: 7 September 2015
Dynamic characterization of strength properties is done, in common practice by the means of a Split-Hopkinson Pressure Bar (also named Kolsky-Bar) apparatus. In such systems, strain rates are limited up to ∼ 5 ⋅ 103 sec−1. For higher strain rates, the strain rate hardening is assumed to be the same as that measured at lower rates, with no direct measurement to validate the assumptions used for this extrapolation. In this work we are using a pulsed current generator (PCG) to create electro-magnetic (EM) driving forces on expanding cylinders. Most standard techniques for creating EM driving forces on cylinders or rings, as reported in the literature, reach strain rates of 1e3-1e4. Using our PCG, characterized by a fast rise time, we reach strain rates of ∼1e5, thus paving the way to a standard technique to measure strength at very high strain rates. To establish the experimental technique, we conducted a numerical study of the expanding cylinder set up using 2D hydrodynamic simulations to reach the desired high strain rates.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.