| Issue |
EPJ Web of Conferences
Volume 26, 2012
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 04011 | |
| Number of page(s) | 4 | |
| Section | Modeling and Numerical Simulation | |
| DOI | https://doi.org/10.1051/epjconf/20122604011 | |
| Published online | 31 August 2012 | |
https://doi.org/10.1051/epjconf/20122604011
Determination of Johnson-holmquist constitutive model parameters for fused silica
1 University of Cassino, DiMSAT, Cassino, Italy
2 MBDA Italia Spa, Bacoli, Italy
a e-mail: nbonora@unicas.it
Johnson-Holmquist constitutive model parameters for Fused Silica under dynamic conditions were determined by means of an inverse calibration technique. The identification of the parameters was performed with an multi-object optimizer using experimental data generated by two different validation tests: Taylor Cylinder Impact tests and Drop Weight tests, with impact velocity and strain rate ranging from 1 to 100 m/s and from 102 to 104 s−1, respectively. The validity of the parameters set determined in this way was verified comparing numerical predictions and experimental results for an independent designed test, given by a fused silica tile impacted at prescribed velocity by a steel sphere.
© Owned by the authors, published by EDP Sciences, 2012