Investigation about the influence of the mechanical properties of lead core and brass jacket of a NATO 7.62 mm ball bullet in numerical simulations of ballistic impacts

¹ Politecnico di Milano, Department of Mechanical Engineering, via la Masa 1, 20156 Milano, Italy
² Politecnico di Torino, Department of Mechanical and Aerospace Engineering, Corso Duca degli Abruzzi 24, 10129 Turin, Italy

Abstract

In the present work a validated numerical approach has been used in order to build a robust and reliable FE model of the impact of a NATO 7.62 mm ball bullet, against an aluminium transmission shaft. The bullet is a full metal jacket type, with a lead alloy core and a brass jacket. Target shaft is made by an Al6061-T6 aluminium alloy. According to the soft core (lead alloy) of the bullet, most effort has been spent in order to evaluate the effect of bullet materials mechanical properties on the numerical results. Numerical analyses, carried out using the non-linear dynamic finite element solver Abaqus∖Explicit 6.10, have been performed focusing on core and jacket material behaviour (target material, Al6061-T6, has been previously calibrated by the authors). Thus numerical analyses have been performed considering for the mechanical behaviour of the bullet both a simplified approach (as reported in literature) and new material data (with strain rate effect) obtained by means of experimental tests on the two materials (lead and brass) with specimens cut directly from the bullet. Finally the results of the analyses have been compared with real experimental ballistic tests.