Open Access
| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 8 | |
| Section | Metallic Materials | |
| DOI | https://doi.org/10.1051/epjconf/202125005002 | |
| Published online | 09 September 2021 | |
- Wiśniewski, A., & Pacek, D. (2013). Experimental research and numerical analysis of 9 mm Parabellum projectile penetration of ultra-high molecular weight polyethylene layers. Problemy Techniki Uzbrojenia, 42. [Google Scholar]
- Wiśniewski, A., & Paczek, D. (2012). Walidacja modelu numerycznego pocisku 9 mm Parabellum. Mechanik, 85, 138-140. [Google Scholar]
- Marechal, C., Bresson, F., & Haugou, G. (2011). Development of a numerical model of the 9 mm parabellum fmj bullet including jacket failure. Engineering Transactions, 59(4), 263-272. [Google Scholar]
- Gilson, L., Rabet, L., Imad, A., & Coghe, F. (2020). Experimental and numerical assessment of non-penetrating impacts on a composite protection and ballistic gelatine. International Journal of Impact Engineering, 136, 103417. [Google Scholar]
- Peroni, L., Scapin, M., Fichera, C., et al. (2012). Mechanical properties at high strainrate of lead core and brass jacket of a NATO 7.62 mm ball bullet. EPJ Web of Conferences. EDP Sciences, 2012. p. 01060. [Google Scholar]
- Coget, Y., Demarty, Y., & Rusinek, A. (2020). Characterization of the Mechanical Behavior of a LeadAlloy, from Quasi-Static to Dynamic Loading for a Wide Range of Temperatures. Materials, 13(10), 2357. [Google Scholar]
- Mirzaie, T., Mirzadeh, H., & Cabrera, J. M. (2016). A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels. Mechanics of Materials, 94, 38-45. [Google Scholar]
- Johnson, G. R. (1983). A constitutive model and data for materials subjected to large strains, high strain rates, and high temperatures. Proc. 7th Int. Sympo. Ballistics, 541-547. [Google Scholar]
- Simon, P., Demarty, Y., Rusinek, A., & Voyiadjis, G. Z. (2018). Material behavior description for a large range of strain rates from low to high temperatures: Application to high strength steel. Metals, 8(10), 795. [Google Scholar]
- Rabinowicz, E. (1951). The nature of the static and kinetic coefficients of friction. Journal of applied physics, 22(11), 1373-1379. [Google Scholar]