Open Access
| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 6 | |
| Section | Microstructural Effects | |
| DOI | https://doi.org/10.1051/epjconf/202125003007 | |
| Published online | 09 September 2021 | |
- J. Speer, D. K. Matlock, B. C. De Cooman, and J. G. Schroth, “Carbon partitioning into austenite after martensite transformation”, Acta Mater., vol. 51, no. 9, pp. 2611–2622, 2003. [Google Scholar]
- J. Mola and B. C. De Cooman, “Quenching and partitioning (Q&P) processing of martensitic stainless steels”, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 44, no. 2, pp. 946–967, 2013. [Google Scholar]
- X. D. Wang, W. Z. Xu, Z. H. Guo, L. Wang, and Y. H. Rong, “Carbide characterization in a Nb-microalloyed advanced ultrahigh strength steel after quenching-partitioning-tempering process”, Mater. Sci. Eng. A, vol. 527, no. 15, pp. 3373–3378, 2010. [Google Scholar]
- F. Vercruysse, C. Celada-casero, B. M. Linke, P. Verleysen, and R. H. Petrov, “Temperature dependence of the static and dynamic behaviour in a Quenching and Partitioning processed low Si steel”, Metals (Basel)., vol. 10, no. 4, p. 509, 2020. [Google Scholar]
- D. P. Koistinen and R. E. Marburger, “A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels”, Acta Metall., vol. 7, pp. 59–60, 1959. [Google Scholar]
- C. Capdevila, F. G. Caballero, and C. García De Andrés, “Determination of Ms temperature in steels: A Bayesian neural network model”, ISIJ Int., vol. 42, no. 8, pp. 894–902, 2002. [Google Scholar]
- M. A. Meyers, Dynamic Behavior of Materials. Hoboken, NJ, USA: John Wiley & Sons, Inc, 1994. [Google Scholar]
- P. Verleysen, J. Degrieck, T. Verstraete, and J. Van Slycken, “Influence of Specimen Geometry on Split Hopkinson Tensile Bar Tests on Sheet Materials”, Exp. Mech., vol. 48, no. 5, pp. 587–598, Oct. 2008. [Google Scholar]
- R. Zaera, J. A. Rodríguez-Martínez, and D. Rittel, “On the Taylor–Quinney coefficient in dynamically phase transforming materials. Application to 304 stainless steel”, Int. J. Plast., vol. 40, pp. 185–201, 2013. [Google Scholar]
- F. Vercruysse, C. Celada-Casero, B. M. Linke, P. Verleysen, and R. H. Petrov, “The effect of Nb on the strain rate and temperature dependent behaviour of quenching & partitioning steels”, Mater. Sci. Eng. A, vol. 800, no. July 2020, p. 140293, 2021. [Google Scholar]