Open Access
| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 6 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/202125001031 | |
| Published online | 09 September 2021 | |
- T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. WilsonHeid, A. De, W. Zhang, “Additive manufacturing of metallic components – Process, structure and properties”, Prog. Mater. Sci., vol. 92, pp. 112–224, 2018, doi: 10.1016/j.pmatsci.2017.10.001. [Google Scholar]
- B. Amir, S. Samuha, and O. Sadot, “Influence of Selective Laser Melting Machine Source on the Dynamic Properties of AlSi10Mg Alloy”, Materials (Basel)., vol. 12, no. 7, p. 1143, 2019, doi: 10.3390/ma12071143. [Google Scholar]
- E. Brandl, U. Heckenberger, V. Holzinger, and D. Buchbinder, “Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior”, Mater. Des., vol. 34, pp. 159–169, 2012, doi: 10.1016/j.matdes.2011.07.067. [Google Scholar]
- I. Rosenthal, A. Stern, and N. Frage, “Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting”, Mater. Sci. Eng. A, vol. 682, no. June 2016, pp. 509–517, 2017, doi: 10.1016/j.msea.2016.11.070. [Google Scholar]
- B. Nurel, M. Nahmany, N. Frage, A. Stern, and O. Sadot, “Split Hopkinson pressure bar tests for investigating dynamic properties of additively manufactured by selective laser melted AlSi10Mg alloy”, pp. 1–28. [Google Scholar]
- L. Denti, “Additive manufactured A357.0 samples using the laser powder bed fusion technique: Shear and tensile performance”, Metals (Basel)., vol. 8, no. 9, 2018, doi: 10.3390/met8090670. [CrossRef] [Google Scholar]
- A. Dorogoy, D. Rittel, and A. Godinger, “Modification of the Shear-Compression Specimen for Large Strain Testing”, Exp. Mech., vol. 55, no. 9, pp. 1627–1639, 2015, doi: 10.1007/s11340-015-0057-6. [Google Scholar]
- B. Karp, A. Dorogoy, and D. Rittel, “A Shear Compression Disk Specimen with Controlled Stress Triaxiality Under Dynamic Loading”, Exp. Mech., vol. 53, no. 2, pp. 243–253, 2013, doi: 10.1007/s11340-012-9630-4. [Google Scholar]
- A. Gilat and J. D. Seidt, “Dynamic punch testing of 2024-T351 aluminum”, in AIP Conference Proceedings, May 2009, vol. 1195, no. 5, pp. 711–714, doi: 10.1063/1.3295239. [Google Scholar]
- ASTM, “B565 – 04, ” 2015. [Google Scholar]
- SLM Solutions, “Material Data Sheet Al-Alloy AISi10Mg, ” SLM Solutions Group AG, 2019. https://www.slm-solutions.com/fileadmin/user_upload/MDS_Al-lloy_AlSi10Mg_0619.pdf. [Google Scholar]
- G. Totten and D. Scott Mackenzie, Eds., Handbook of Aluminum. CRC Press, 2003. [Google Scholar]