Open Access
| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 8 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/202125001018 | |
| Published online | 09 September 2021 | |
- W. Chen and B. Song, Split Hopkinson (Kolsky) Bar. Boston, MA: Springer US, 2011. [CrossRef] [Google Scholar]
- G. T. Gray III, “Classic Split-Hopkinson Pressure Bar Testing, ” in Mechanical Testing and Evaluation, H. Kuhn and D. Medlin, Eds. ASM International, 2000, pp. 462–476. [Google Scholar]
- H. D. Espinosa, A. J. Patanella, and M. Fischer, “Dynamic Friction Measurements at Sliding Velocities Representative of High-Speed Machining Processes, ” J. Tribol., vol. 122, no. 4, pp. 834–848, Oct. 2000, doi: 10.1115/1.1310331. [Google Scholar]
- H. D. Espinosa, A. Patanella, and M. Fischer, “A novel dynamic friction experiment using a modified kolsky bar apparatus”, Exp. Mech., vol. 40, no. 2, pp. 138–153, Jun. 2000, doi: 10.1007/BF02325039. [Google Scholar]
- S. Rajagopalan and V. Prakash, “A modified torsional kolsky bar for investigating dynamic friction”, Exp. Mech., vol. 39, no. 4, pp. 295–303, Dec. 1999, doi: 10.1007/BF02329808. [Google Scholar]
- F. Yuan and V. Prakash, “Use of a modified torsional Kolsky bar to study frictional slip resistance in rock-analog materials at coseismic slip rates”, Int. J. Solids Struct., vol. 45, no. 14–15, pp. 4247–4263, Jul. 2008, doi: 10.1016/j.ijsolstr.2008.03.012. [Google Scholar]
- B. Rodrigues, “Dynamic Frictional Response of Granular Materials Under Seismically Relevant Conditions Using a Novel Torsional Kolsky Bar Apparatus”, Masters of Science, Case Western Reserve, 2017. [Google Scholar]
- K. Ogawa, “Impact friction test method by applying stress wave”, Exp. Mech., vol. 37, no. 4, pp. 398–402, Dec. 1997, doi: 10.1007/BF02317304. [Google Scholar]
- S. Philippon, G. Sutter, and A. Molinari, “An experimental study of friction at high sliding velocities”, Wear, vol. 257, no. 7–8, pp. 777–784, Oct. 2004, doi: 10.1016/j.wear.2004.03.017. [Google Scholar]
- J. J. Arnoux, G. Sutter, G. List, and A. Molinari, “Friction Experiments for Dynamical Coefficient Measurement”, Adv. Tribol., vol. 2011, pp. 1–6, 2011, doi: 10.1155/2011/613581. [Google Scholar]
- A. Lodygowski, L. Faure, G. Z. Voyiadjis, and S. Philippon, “Dry Sliding Friction Experiments at Elevated Velocities: Dry Sliding Friction Experiments”, Strain, vol. 47, pp. 436–453, Dec. 2011, doi: 10.1111/j.1475-1305.2010.00785.x. [Google Scholar]
- G. List, G. Sutter, J. J. Arnoux, and A. Molinari, “Study of friction and wear mechanisms at high sliding speed”, Mech. Mater., vol. 80, pp. 246–254, Jan. 2015, doi: 10.1016/j.mechmat.2014.04.011. [Google Scholar]
- G. List, G. Sutter, and J. J. Arnoux, “Analysis of the high speed sliding interaction between titanium alloy and tantalum”, Wear, vol. 301, no. 1–2, pp. 663–670, Apr. 2013, doi: 10.1016/j.wear.2012.11.070. [Google Scholar]
- G. Sutter and N. Ranc, “Flash temperature measurement during dry friction process at high sliding speed”, Wear, vol. 268, no. 11–12, pp. 1237–1242, May 2010, doi: 10.1016/j.wear.2010.01.019. [Google Scholar]
- B. Durand, F. Delvare, P. Bailly, and D. Picart, “Friction Between Steel and a Confined Inert Material Representative of Explosives Under Severe Loadings”, Exp. Mech., vol. 54, no. 7, pp. 1293–1303, Sep. 2014, doi: 10.1007/s11340-014-9885-z. [Google Scholar]
- A. M. Bragov, A. Yu. Konstantinov, and A. K. Lomunov, “Determining dynamic friction using a modified Kolsky method”, Tech. Phys. Lett., vol. 34, no. 5, pp. 439–440, May 2008, doi: 10.1134/S1063785008050234. [Google Scholar]
- B. Sanborn, B. Song, and E. E. Nishida, “Development of a New Method to Investigate Dynamic Friction Behavior of Metallic Materials Using a Kolsky Tension Bar.”, SAND2017-11985, 1596207, Nov. 2017. doi: 10.2172/1596207. [Google Scholar]
- B. Sanborn, B. Song, and E. Nishida, “Development of a New Method to Investigate the Dynamic Friction Behavior of Interfaces Using a Kolsky Tension Bar”, Exp. Mech., vol. 58, no. 2, pp. 335–342, Feb. 2018, doi: 10.1007/s11340-017-0350-7. [Google Scholar]
- D. E. Burton, “Connectivity Structures and Differencing Techniques for StaggeredGrid Free-Lagrange Hydrodynamics”, New Brunswick, New Jersey, 1992. [Google Scholar]
- D. E. Burton, “Consistent finite-volume discretization of hydrodynamic conservation laws for unstructured grids”, Las Vegas, NV, 1994. [Google Scholar]
- E. J. Caramana, D. E. Burton, M. J. Shashkov, and P. P. Whalen, “The Construction of Compatible Hydrodynamics Algorithms Utilizing Conservation of Total Energy”, J. Comput. Phys., vol. 146, pp. 227–262, 1998. [CrossRef] [Google Scholar]
- M. T. Bement and M. A. Kenamond, “Slideline modeling in the FLAG hydrocode”, No. LA-UR-11-04993, 2011. [Google Scholar]
- D. F. P. Bowden and D. Tabor, “Mechanism of Metallic Friction”, p. 3, 1942. [Google Scholar]
- J. R. Whitehead, “Surface deformation and friction of metals at light loads”, p. 20, 1950. [Google Scholar]
- E. Rabinowicz, “Friction coefficients of noble metals over a range of loads”, Wear, vol. 159, no. 1, pp. 89–94, Nov. 1992, doi: 10.1016/0043-1648(92)90289-K. [Google Scholar]