Open Access
| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 02024 | |
| Number of page(s) | 6 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/201818302024 | |
| Published online | 07 September 2018 | |
- Besnard G., Hild F., Lagrange J. M., Martinuzzi P., Roux S., Analysis of necking in high speed experiments by stereocorrelation, International Journal of Impact Engineering. 49: 1353–1367 (2012) [CrossRef] [Google Scholar]
- Bridgman, P. W., Studies in large plastic flow and fracture (Vol. 177). New York: McGraw-Hill, (1952) [Google Scholar]
- Lin, E.I.H., Plastic instability criteria for necking of bars and ballooning of tubes, Int. conf. on structural mechanics in reactor technology, San Francisco, (1977) [Google Scholar]
- Hart EW., Theory of the tensile test, Acta Metall; 15: 351–5. (1967) [Google Scholar]
- Guan Z., Quantitative analysis on the onset of necking in rate-dependent tension, Materials and Design 56 209–218 (2014) [CrossRef] [Google Scholar]
- Ghosh, A. K. Tensile instability and necking in materials with strain hardening and strain-rate hardening. Acta Metallurgica, 25 (12), 1413-1424 (1977) [CrossRef] [Google Scholar]
- Mirone, G., & Barbagallo, R. Congelamento dello Strain Rate Effect In Prove Dinamiche su Hopkinson Bar. Proceedinigs of the 46th AIAS National Conference, Pisa (2017) [Google Scholar]
- Mirone G., Corallo D., Barbagallo R., Experimental issues in tensile Hopkinson bar testing and a model of dynamic hardening. Int. J. of Impact Engineering, 103, 180-194 (2017) [CrossRef] [Google Scholar]
- Mirone, G. A new model for the elastoplastic characterization and the stress–strain determination on the necking section of a tensile specimen. International Journal of Solids and Structures, 41 (13), 3545-3564 (2004) [CrossRef] [Google Scholar]
- Mirone G., The dynamic effect of necking in Hopkinson bar tension tests, Mech. Mater. 58 84- 96 (2013) [CrossRef] [Google Scholar]
- Osovski, S., Rittel, D., Rodríguez-Martínez, J. A., & Zaera, R., Dynamic tensile necking: influence of specimen geometry and boundary conditions. Mechanics of materials, 62, 1-13 (2013) [CrossRef] [Google Scholar]
- Rusinek A.,Zaera R., Klepaczko J. R., Cheriguene R., Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel, Acta Mater.; 53: 5387–400 (2005) [Google Scholar]