Open Access
| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 4 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/201818302002 | |
| Published online | 07 September 2018 | |
- J.F. Kalthoff, S.Winkler, Failure mode transition of high rates of shear loading, in :C.Y. Chiem, H,-D. Kunze, L.W. Meyer (Eds), Proceedings of the International Conference on Impact Loading and Dynamic Behavior of Materials, Deutsche Gesellschaft fur Metallkunde, DGM-Verlag, Oberursel, Germany, pp. 185-195, (1987) [Google Scholar]
- E. Roux, P. Longère, O. Cherrier, T. Millot, D. Capdeville, and J. Petit, “Analysis of ASB assisted failure in a high strength steel under high loading rate,” Mater. Des., vol. 75, pp. 149–159 (2015) [CrossRef] [Google Scholar]
- D. H. Li, Y. Yang, T. Xu, H. G. Zheng, Q. S. Zhu, and Q. M. Zhang, “Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy,” Mater. Sci. Eng. A, vol. 527, no. 15, pp. 3529–3535 (2010) [CrossRef] [Google Scholar]
- P. Longere and A. Dragon, “Dynamic vs. quasi-static shear failure of high strength metallic alloys: Experimental issues,” Mech. Mater., vol. 80, no. PB, pp. 203–218 (2015) [CrossRef] [Google Scholar]
- J. Richeton and S. Ahzi, “Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers : Characterization and modeling of the compressive yield stress,” vol. 43, pp. 2318– 2335 (2006) [Google Scholar]
- W. Chen, F. Lu, and M. Cheng, “Tension and compression tests of two polymers under quasi-static and dynamic loading,” vol. 21, pp. 113–121, (2002) [Google Scholar]
- E. M. Arruda, M. C. Boyce, and R. Jayachandran, “Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers,” vol. 19, pp. 193– 212 (1995) [Google Scholar]
- L. Lalande, C. J. G. Plummer, P. Ge, and J. E. Ma, “Microdeformation mechanisms in rubber toughened PMMA and PMMA-based copolymers,” vol. 73, pp. 2413–2426 (2006) [Google Scholar]