Deformation and failure of bulk metallic glasses under different initial temperatures

Open Access

Issue		EPJ Web of Conferences Volume 94, 2015 DYMAT 2015 - 11^th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading


Article Number		04017
Number of page(s)		6
Section		Modeling and Numerical Simulation
DOI		https://doi.org/10.1051/epjconf/20159404017
Published online		07 September 2015

Inoue A., Kawamura Y., Shibata T., et al. Viscous flow deformation in supercooled liquid state of bulk amorphous Zr₅5Al₁0Ni₅Cu₃0 alloy. Materials Transactions JIM, 1996, 39 (6): 1337–1341 [CrossRef] [Google Scholar]
Nieh, T.G., Wadsworth, J., Liu, C.T., et al. Plasticity and structural instability in a bulk metallic glass deformed in the supercooled liquid region. Acta Materialia, 2001, 49; 15: 2887–2896 [CrossRef] [Google Scholar]
Lu, J., Ravichandran, G., Johnson, W.L. Deformation behavior of the Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5 bulk metallic glass over a wide range of strain-rates and temperatures. Acta Materialia, 2003, 51: 3429–3443 [Google Scholar]
Zhang, Z.F., Eckert, J., Schultz, L. Difference in compressive and tensile fracture mechanisms of Zr₅₉Cu₂₀Al₁₀Ni₈Ti₃ bulk metallic glass. Acta Materialia, 2003, 51:1167–1179 [CrossRef] [Google Scholar]
Dai, L.H., Bai, Y.L. Basic mechanical behaviors and mechanics of shear banding in BMGs. International Journal of Impact Engineering, 2008, 35: 704–716 [Google Scholar]
Nishiyama, N., Inoue, A. Glass transition behavior and viscous flow working of Pd₄₀Cu₃₀Ni₁₀P₂₀ amoephous alloy. Materials Transactions JIM, 1999; 40 (1): 64–70 [CrossRef] [Google Scholar]
Conner, R.D., Dandliker, R.B., Scruggs, V., et al. Dynamic deformation behavior of tungsten-fiber / metallic–glass matrix composites. International Journal of Impact Engineering. 2000; 24: 435–444 [CrossRef] [Google Scholar]
Choi-Yim, H., Conner, R.D., Szuecs, F., et al. Quasistatic and dynamic deformation of tungsten reinforced Zr₅₇Nb₅Al₁₀Cu_15.4Ni_12.6 bulk metallic glass matrix. Scripta Materialia, 2001; 45: 1039–1045 [CrossRef] [Google Scholar]
Spaepen, F. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metallurgica, 1977, 25 (9): 407–415 [Google Scholar]
Huang, R., Suo, Z., Prevost, J.H. Inhomogeneous deformation in metallic glasses. Journal of the Mechanics and Physics of Solids, 2002, 50: 1011–1027 [CrossRef] [Google Scholar]
Jiang, M.Q., Dai, L.H. On the origin of shear banding instability in metallic glasses. Journal of the Mechanics and Physics of Solids, 2009, 57: 1267–1292 [Google Scholar]
Zhang, Z.F., Eckert, J. Unified Tensile Fracture Criterion. Physical Review Letters, 2005, PRL 94: 094301-1-4 [Google Scholar]
Chen, Y., Jiang, M.Q., Wei, Y.J., et al. Failure criterion for metallic glasses. Philosophical Magazine, 2011, 91(36): 4536–4554 [CrossRef] [Google Scholar]
Zhang, Z.F., Wu, F.F., Gao, W., et al. Wavy cleavage fracture of bulk metallic glass. Applied Physics Letters, 2006, 89: 251917-1-3 [Google Scholar]
Wright, W.J., Hufnagel, T.C., Nix, W.D. Free volume coalescence and void formation in shear bands in metallic glass. Journal of Applied Physics, 2003; 93 (8):1432–1437 [CrossRef] [Google Scholar]
Xue, Y.F., Cai, H.N., Wang, L., et al. Effect of loading rate on failure in Zr-based bulk metallic glass. Materials Science and Engineering A, 2008, 473: 105–110 [CrossRef] [Google Scholar]
Jiang, M.Q., Ling, Z., Meng, J.X., et al. Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage. Philosophical Magazine, 2008, 21(8): 407–426 [Google Scholar]
Gao, Y.F. An implicit finite element method for simulating inhomogeneous deformation and shear bands of amorphous alloys based on the free-volume model. Modelling and Simulation in Materials Science and Engineering, 2006, 14: 1329–1345 [CrossRef] [Google Scholar]
Chen, Y., Jiang, M.Q., Dai, L.H. How does the initial free volume distribution affect shear band formation in metallic glass?. Science China: Physics, Mechanics & Astronomy. 2011, 54 (8): 1488–1494 [CrossRef] [Google Scholar]
Zhou, F., Wright, T.W., Ramesh, K.T. A numerical methodology for investigating the formation of adiabatic shear bands. Journal of the Mechanics and Physics of Solids, 2006, 54: 904–926 [CrossRef] [Google Scholar]
Li, J.C., Wei, Q., Chen, X.W., et al. On the mechanism of deformation and failure in bulk metallic glasses. Materials Science and Engineering A, 2014, 610: 91–105 [CrossRef] [Google Scholar]