Open Access
| Issue |
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 02023 | |
| Number of page(s) | 6 | |
| Section | Microstructural Effects | |
| DOI | https://doi.org/10.1051/epjconf/20159402023 | |
| Published online | 07 September 2015 | |
- Kalidindi, S.R., A. Bhattacharya, and R. Doherty, Detailed Analysis of Plastic Deformation in Columnar Polycrystalline Aluminum Using Orientation Image Mapping and Crystal Plasticity Models. Proceedings of the Royal Society of London: Mathematical, Physical and Engineering Sciences., 2004. 460(2047): p. 1935–1956 [CrossRef] [Google Scholar]
- Asaro, R.J., Crystal Plasticity. Journal of Applied Mechanics, 1983. 50(4b): p. 921–934 [Google Scholar]
- Kalidindi, S.R. and L. Anand, An Approximate Procedure for Predicting the Evolution of Crystallographic Texture in Bulk Deformation Processing of Fcc Metals. International Journal of Mechanical Sciences, 1992. 34(3): p. 309–329 [CrossRef] [Google Scholar]
- Adams, B.L., Orientation imaging microscopy: Emerging and future applications. Ultramicroscopy Proceedings of the 1996 6th Conference on Frontiers in Electron Microscopy in Materials Science, Jun 4-7 1996, 1997. 67(1-4): p. 11–17 [Google Scholar]
- Adams, B.L. Measurement and representation of polycrystalline microstructure. in Winter Annual Meeting of the American Society of Mechanical Engineers, Nov 8–13 1992. 1992. Anaheim, CA, USA: Publ by ASME, New York, NY, USA [Google Scholar]
- Kalidindi, S.R. and S. Pathak, Determination of the effective zero-point and the extraction of spherical nanoindentation stress-strain curves. Acta Materialia, 2008. 56: p. 3523–32 [CrossRef] [Google Scholar]
- Pathak, S., J. Shaffer, and S.R. Kalidindi, Determination of an effective zero-point and extraction of indentation stress-strain curves without the continuous stiffness measurement signal. Scripta Materialia, 2009. 60: p. 439–42 [CrossRef] [Google Scholar]
- Li, X. and B. Bhushan, A review of nanoindentation continuous stiffness measurement technique and its applications. Materials Characterization, 2002. 48(1): p. 11–36 [Google Scholar]
- Fischer-Cripps, A.C., Study of analysis methods of depth-sensing indentation test data for spherical indenters Journal of Materials Research, 2001. 16: p. 1579–84 [CrossRef] [Google Scholar]
- Pathak, S., D. Stojakovic, and S.R. Kalidindi, Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopy. Acta Materialia, 2009. 57: p. 3020–8 [CrossRef] [Google Scholar]
- Pathak, S., et al., Studying grain boundary regions in polycrystalline materials using spherical nano-indentation and orientation imaging microscopy. Journal of Materials Science, 2012. 47(2): p. 815–823 [CrossRef] [Google Scholar]
- Pathak, S., et al., Viscoelasticity and high buckling stress of dense carbon nanotube brushes. Carbon, 2009. 47: p. 1969–1976 [CrossRef] [Google Scholar]
- Pathak, S., et al., Assessment of lamellar level properties in mouse bone utilizing a novel spherical nanoindentation data analysis method. Journal of the Mechanical Behavior of Biomedical Materials, 2012. 13(0): p. 102–117 [CrossRef] [PubMed] [Google Scholar]
- Vachhani, S.J. and S.R. Kalidindi, Grain-Scale Measurement of Slip Resistances in Aluminum Polycrystals using Spherical Nanoindentation Acta Materialia, 2015. accepted [Google Scholar]
- Hertz, H., Miscellaneous Papers. New York: MacMillan and Co., Ltd, 1896 [Google Scholar]
- Johnson, K.L., Indentation Contact Mechanics. 1985: Cambridge University Press, Cambridge [CrossRef] [Google Scholar]
- Pathak, S., et al., Importance of surface preparation on the nano-indentation stress-strain curves measured in metals. Journal of Materials Research, 2009. 24: p. 1142–55 [CrossRef] [Google Scholar]
- Vachhani, S.J., R.D. Doherty, and S.R. Kalidindi, Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentation Acta Materialia, 2013. 61(10): p. 3744–3751 [CrossRef] [Google Scholar]
- T. Bucchiet, E.K. Cerreta, L.D.S.R. Chen, J. Michael, Characterization of Tri-Lab Tantalum. Sand2014-17645 [Google Scholar]
- Bunge, H.-J., Texture analysis in materials science. Mathematical Methods. 1993, Göttingen: Cuvillier Verlag [Google Scholar]
- Kalidindi, S.R. and S.J. Vachhani, Mechanical characterization of grain boundaries using nanoindentation Current Opinion in Solid State and Materials Science, 2014. 18(3): p. 196–204 [CrossRef] [Google Scholar]