Open Access
Issue
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 01004
Number of page(s) 5
Section Experimental Techniques
DOI https://doi.org/10.1051/epjconf/20159401004
Published online 07 September 2015
  • COST TU0601 - Robustness of Structures: http://www.cost.eu/COST_Actions/tud/Actions/TU0601
  • P.H. Bishoffs, S.H. Perry, Mat. Struct. 24, 425–450 (1991) [CrossRef]
  • L.J. Malvar, C.A. Ross, ACI Mat. J. 95(6), 735–739 (1998)
  • Comité Euro-International du Béton , Bulletin 187, (1988)
  • J. Seabold, Tech. Rep. R695, (1970)
  • W.L. Cowell, Tech. Rep. R394, (1965)
  • W. Keenan, J. Tancreto, G. Meyers, F. Johnson, J. Hopkins, H. Nickerson, W. Armstrong, Tech. Mem. 51-83-19 (prev. 2591TM), (1983)
  • R.G. Crum,ACI J. Proc. 56(1), 59–61 (1959)
  • L.J. Malvar, ACI Mat. J. 95, 609–616 (1998)
  • FIB-International Federation for Structural Concrete, Model Code 2010, Bulletin 66, (2012)
  • European Standard , EN 10080, (2005)
  • E. Cadoni, L. Fenu, D. Forni, Constr. Build. Mat. 35, 399–407 (2012) [CrossRef]
  • E. Cadoni, M. Dotta, D. Forni, N. Tesio, Appl. Mech. Mat. 82, 86–91 (2011) [CrossRef]
  • E. Cadoni, M. Dotta, D. Forni, N. Tesio, Mater. Struct. 1–11 (2014)
  • N.K. Singh, E. Cadoni, M.K. Singha, N.K. Gupta, J. Eng. Mech-ASCE 139(9), 1197–1206 (2013) [CrossRef]
  • C. Albertini, E. Cadoni, G. Solomos, Philos. Trans. A Math. Phys. Eng. Sci. 372 (2015)
  • E. Cadoni, M. Dotta, D. Forni, N. Tesio, C. Albertini, Mat. Des. 49, 657–666 (2013) [CrossRef]
  • G.J. Johnson, W.J. Cook, Eng. Fract. Mech. 21–31 (1985)
  • G.R. Cowper, P.S. Symonds, Div. Appl. Math. Rep. (1957)
  • D. Asprone, E. Cadoni, A. Prota, ACI Struct. J. 106, 523–529 (2009)
  • E. Cadoni, M. Dotta, D. Forni, P. Spaetig, J. Nucl. Mat. 414(3), 360–366 (2011) [CrossRef]
  • A. Caverzan, E. Cadoni, M. di Prisco, Int. J. Imp. Engng. 45, 28–38 (2012) [CrossRef]
  • A. Caverzan, E. Cadoni, M. di Prisco, Mech. Mat. 59, 87–109 (2013) [CrossRef]