Open Access
| Issue |
EPJ Web of Conferences
Volume 26, 2012
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01036 | |
| Number of page(s) | 5 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/20122601036 | |
| Published online | 31 August 2012 | |
- R. Orru et al., 2009, Consolidation/synthesis of materials by electric current activated/assisted sintering, Mat. Sci. Eng. –Report, 63, 127–287 [Google Scholar]
- U. Anselmi-Tamburini et al., 2004, Spark plasma sintering and characterization of bulk nanostructured fully stabilized zirconia: Part I. Densification studies, J. Mater. Res., 19, 3255 [CrossRef] [Google Scholar]
- C. Wang et al., 2001, Microstructure homogeneity control in spark plasma sintering of Al2O3 ceramics, J. Eur.Ceram.Soc., 31, 231–235 [Google Scholar]
- K. Hokamoto et al., « High temperature shock consolidation of hard ceramic powders », Physica B, Vol. 239, pp. 1–5, 1997 [Google Scholar]
- P. Skoglund, « High density PM parts produced by high velocity compaction », Powder metallurgy, Vol. 44, N ∘3, pp. 199–201, 2001 [Google Scholar]
- M. Trécant et al., 1955, Dynamic compaction of calcium phosphate biomaterials, J. Mat. Sci Mater. Med., 6, 545–551 [Google Scholar]
- H.Å. Häggblad et al., 2005, Simulation of high velocity compaction of powders in a rubber mould with characterization of silicone rubber and titanium powder using a modified split Hopkinson set-up, Powder Technol., 154, 33–42 [Google Scholar]
- A. Cezairliyan et al., 1971, Design and operational characteristics of a high-speed (millisecond) system for the measurement of thermophysical properties at high temperatures, Journal of research of the national bureau of standards-C. Engineering and instrumentation, Vol. 75C, N ∘1, 7–18 [Google Scholar]
- Jankowiak et al., 2011, Validation of the Klepaczko–Malinowski model for friction correction and recommendations on Split Hopkinson Pressure Bar, Finite Elements in Analysis and Design, 47, Issue 10, 1191–1208 [Google Scholar]
- T. Borvik et al., 2004, Perforation of al 5083-H116 plates, Int. J. Impact Engng, 30, Issue 4, 367–384 [Google Scholar]
- S. Diouf, A. Molinari, 2012, Densification mechanisms in spark plasma sintering: Effect of particle size and pressure, Powder Technol., doi:10.1016/j.powtec.2012.01.005 [Google Scholar]