Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
---|---|---|
Article Number | 05008 | |
Number of page(s) | 6 | |
Section | Metallic Materials | |
DOI | https://doi.org/10.1051/epjconf/202125005008 | |
Published online | 09 September 2021 |
https://doi.org/10.1051/epjconf/202125005008
Deformation and damage characteristics of ball bearings under blast loading
1
Blast and Impact Survivability Research Unit (BISRU), Department of Mechanical Engineering, University of Cape Town, Rondebosch, 7700, South Africa
2
Department of Civil and Structural Engineering, University of Sheffield, Sheffield, S13JD, United Kingdom
Published online: 9 September 2021
This paper presents the unique failure characteristics, such as fragmentation, internal cracks, general deformation and pitting, observed on a SS420C ball bearing from direct blast loading using a cylindrical PE-4 explosive. Axisymmetric simulations were performed to gain insights of the failure mechanisms. While additional work is needed to fully understand all characteristic found, valuable findings have been presented to explain some of the failures.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.