Dynamic properties of reactor steels Kh16N15M3T1 and Kh13V2 under shock-wave loading of submicrosecond scale

Sergey S. Mokrushin; Anna S. Mayorova; Svetlana N. Malyugina; Alexander V. Pavlenko; Victor V. Sagaradze; Natalya V. Kataeva; Elena G. Volkova

doi:10.1051/epjconf/201818302048

All issues

Volume 183 (2018)

EPJ Web Conf., 183 (2018) 02048

Abstract

Open Access

Issue		EPJ Web Conf. Volume 183, 2018 DYMAT 2018 - 12^th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading


Article Number		02048
Number of page(s)		4
Section		Experimental Techniques
DOI		https://doi.org/10.1051/epjconf/201818302048
Published online		07 September 2018

EPJ Web of Conferences 183, 02048 (2018)
https://doi.org/10.1051/epjconf/201818302048

Dynamic properties of reactor steels Kh16N15M3T1 and Kh13V2 under shock-wave loading of submicrosecond scale

Sergey S. Mokrushin¹, Anna S. Mayorova¹, Svetlana N. Malyugina¹, Alexander V. Pavlenko¹^a, Victor V. Sagaradze², Natalya V. Kataeva² and Elena G. Volkova²

¹ RFNC-VNIITF, Snezhinsk, Russia
² Institute of Metal Physics, Ural Branch of Russian Academy of Sciences

^a Corresponding author: avpavlenko@vniitf.ru

Published online: 7 September 2018

Abstract

Kh16N15M3T1 and Kh13V2 reactor steels were investigated. The study was carried out using a light-gas gun with the deformation velocities ranging from 4·10⁴ to 3·10⁶ s^-1 and shock-loading pulses in 0.05-1 μs duration range. Dependences of the spallation strength and dynamic elastic limit in a wide temperature range are obtained. The recovered specimens were used to carry out the metallography analysis.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.