EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Published online||07 September 2018|
Effect of Strain Rate on Compressive Behaviour of Silicone Rubber
Graduate Student, Graduate School of Science and Engineering, National Defense Academy,
2 Department of Mechanical Engineering, National Defense Academy, Kanagawa 239-8686, Japan
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
The purpose of this study is to evaluate the effect of strain rate on compressive behaviour of silicone rubber. The silicone rubber which was used as biomimetic material was prepared as a specimen. The shape of specimen was cubic and each side length was 10 mm. In this study, a dynamic compressive test was performed using a drop-weight testing machine at the strain rate of approximately 101 s-1, which can be detect the compressive stress for a long time without any disturbance. For comparison, a quasi-static compressive test was performed using the universal testing machine at the strain rate of 10-4 to 10-1 s-1. In the deformation process of the silicone rubber, the flow stress did not increase at the early stage of deformation. When the strain reached 0.6, the flow stress was increased with increasing strain. This deformation process was considered to be due to rubber elasticity. It was confirmed that the silicone rubber showed an increase of the flow stress with increasing strain rate, which showed general behaviour of soft materials such as rubber. In the silicone rubber, the flow stress with respect to the strain rate could be simply expressed with the Cowper-Symonds constitutive equation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.