EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Poisson‘s Ratio Induced Radial Inertia Confinement During Dynamic Compression of Hyperelastic Foams
Sandia National Laboratories,
1515 Eubank SE,
2 Sandia National Laboratories, 7011 East Avenue, Livermore, California 94551, USA
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
Hyperelastic foams have excellent impact energy absorption capability and can experience full recovery following impact loading. Consequently, hyperelastic foams are selected for different applications as shock isolators. Obtaining accurate intrinsic dynamic compressive properties of the hyperelastic foams has become a crucial step in shock isolation design and evaluation. Radial inertia is a key issue in dynamic characterization of soft materials. Radial inertia induced stress in the sample is generally caused by axial acceleration and large deformation applied to a soft specimen. In this study, Poisson’s ratio of a typical hyperelastic foam – silicone foam – was experimentally characterized under high strain rate loading and was observed to drastically change across the densification process. A transition in the Poisson’s ratio of the silicone foam specimen during dynamic compression generated radial inertia which consequently resulted in additional axial stress in the silicone foam sample. A new analytical method was developed to address the Poisson’s ratio-induced radial inertia effects for hyperelastic foams during high rate compression.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.