| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01062 | |
| Number of page(s) | 4 | |
| Section | Modelling and Numerical Simulation | |
| DOI | https://doi.org/10.1051/epjconf/201818301062 | |
| Published online | 07 September 2018 | |
https://doi.org/10.1051/epjconf/201818301062
Energy absorbing properties of a steel profile made of dual phase steel
Motor Transport Institute,
Jagielloñska 80,
03-301,
Warsaw,
Poland
* Corresponding author: wojciech.mocko@its.waw.pl
Published online: 7 September 2018
Three point bending tests were carried out using a drop tower testing machine. Profile were made of 2 mm dual phase steel. Material was characterized at wide range of strain rates to calibrate Rusinek-Klepaczko constitutive model. Finally, experimental results were compared with numerical predictions obtained using finite element method.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.