EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Section||Modelling and Numerical Simulation|
|Published online||07 September 2018|
Analysis of Fracture Behaviour of Exploded Metal Cylinders with Varied Charge
Faculty of Mechanical Engineering and Mechanics, Ningbo University,
2 School of Mechatronical Engineering, Beijing Institute of Technology, Beijing, 10081, China
* Corresponding author: email@example.com
Published online: 7 September 2018
Explosively driven fragmentation of ductile metals cylinders is a highly complex phenomenon. In this work, the fracture characteristics of exploded TA2 titanium alloy cylinder with varied charge were investigated numerically and experimentally. The results show that the fracture surfaces of fragments lie along planes of maximum shear stress for either a higher or a lower detonation pressure, but their mechanism is different. The finite element analysis demonstrated that the equivalent plastic strain in the middle of the wall is always larger than that of inner and outer wall for metal cylinder during the stage of shock wave driven period. For the high explosive pressures, the micro-cracks originated firstly in middle zone of wall during the stage of shock wave driven, and extend to the inner and outer wall in the direction of maximum shear stress. Explosives which generate lower detonation pressures, the shear fracture of cylinder originated from the inner wall and propagate to the outer wall in an angle of 45° or 135° to radial, the crack begin at the stage of free expansion. The simulated analysis of the process of deformation and fragmentation for exploded metal cylinder agree with the experimental results.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.