EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Section||Modelling and Numerical Simulation|
|Published online||07 September 2018|
Microspalling Process of an Explosively-Driven Metal Tin: Experiments and Numerical Simulations
Institute of Fluid Physics, Chinese Academy of Engineering Physics,
2 Institute of Applied Physics and Computational Mathematics, Chinese Academy of Engineering Physics, Beijing, 100094, China
* Corresponding author : firstname.lastname@example.org
Published online: 7 September 2018
Shock-induced melting phenomenon in tin material attracts considerable attention recently. Particularly, under the strong explosively loading, the shock-induced melted tin with lower strength is the weak region where the dynamic damage and fracture commonly appear, resulting in the “micro-spallation” process. In the current work, three tin targets with different thicknesses are designed to investigate such micro-spallation phenomenon of shock-loaded pure tin. A new damage model considering the melting effect is proposed and the simulated results are compared with experimental measurements for the validation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.