| Issue |
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 3 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/20159401005 | |
| Published online | 07 September 2015 | |
https://doi.org/10.1051/epjconf/20159401005
Recent developments in dynamic testing of materials
The Ohio State University, Department of Mechanical and Aerospace Engineering 201 W. 19th Ave., Columbus, OH 43210, USA
a Corresponding author: gilat.1@osu.edu
Published online: 7 September 2015
New techniques for dynamic characterization of materials that have been developed in the last three years (since the last DYMAT conference in 2012), and results from recent dynamic testing of Inconel 718 are presented. The first development is a dynamic punch test in which three dimensional Digital Image Correlation (DIC) is used to measure the deformation of the rear surface of a specimen as it being penetrated. The second experimental technique that is under development is a dynamic tension experiment in which full-field strain measurement with DIC and full-field temperature measurement are done simultaneously during the test.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.