EPJ Web of Conferences
Volume 26, 2012DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Published online||31 August 2012|
Response of a circular steel plate with different weld geometries subject to impact loading
Nordmetall Impact Dynamics GmbH, Hauptstrasse 16, 09221 Adorf, Germany, www.nordmetall.net
The dynamic response of clamped circular steel plates was experimentally investigated under impact loading. The experiments were performed using a high energy drop weight machine with a 5 ton drop weight, which falls from a height of 0.8 m and results in a total impact energy of 40 kJ. Target plates of 10 mm thickness and 580 mm diameter were welded in three different geometrical configurations of weld elements on the lower side. The impact process was carried out using a hemispherical punch. The force was registered by strain gages on the punch. A full dynamic strain field measurement was applied on the tension side using two high speed cameras. The evaluation of the strain field was carried out with the speckle photography technique. The effect of cracks and welding on the deformation and failure behavior was studied using pre-cracked disks and plates with welded webs, welded circular discs and also with a weld seam only. The failure of the plates was registered using the high speed cameras and from the force signal. The results are analyzed and discussed regarding the behavior of the material and component under high rate loading.
© Owned by the authors, published by EDP Sciences, 2012