EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Published online||07 September 2018|
Dynamic tension of aluminum alloy AMg-6 in a facility of Split Hopkinson Bar
Russian Federal Nuclear Center - VNIIEF,
Nizhniy Novgorod region,
2 Sarov Physico-Technical Institute NIYaU MEPhI, 607186, Sarov, Nizhniy Novgorod region, Russia
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
The results are presented to create a facility for studying dynamic tension of structural materials by using the Split Hopkinson Bar Method (SHB method). The explosive method of loading and a cylindrical corner-rounding sample are used in a facility. A sample has threads at both end faces and it fastened in rods by the help of threads. The results of test experiments are presented in the facility for studying dynamic tension of the aluminum alloy AMg-6 at strain rates of 1160-1450 s-1. The diagrams of dynamic tension σ-ε were built. The data on peculiarities of deformation AMg-6 were gained.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.