Web of Conferences
Subscriber Authentication Point
Home DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
DYMAT Vol. 2

DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading

Volume 2

Brussels, Belgium, September 7-11, 2009

ISBN: 978-2-7598-0473-3
Presentation|Committees|Winners|Citing a paper|Request for information|  See proceedings :Volume 1-  Volume 2



    Micro-Structural Effects

  • Microstructural model for shear strain localization and occurrence of adiabatic shear band at high strain rates     p. 935
    M.N. Bassim and A.G. Odeshi
    Abstract | PDF file (1.545 MB)


  • Catastrophic rupture of heterogeneous brittle materials under impact loading     p. 941
    H.Y. Wang, J. Shu, Y.L. Bai, M.F. Xia and F.J. Ke
    Abstract | PDF file (161.7 KB)


  • Dynamic behavior and fracture of granular composite Al-W     p. 947
    Po-Hsun Chiu and V.F. Nesterenko
    Abstract | PDF file (641.3 KB)


  • A new perspective on adiabatic shear failure     p. 955
    D. Rittel
    Abstract | PDF file (353.9 KB)


  • Influence of shockwave obliquity on deformation twin formation in Ta     p. 963
    G.T. (Rusty) Gray III, V. Livescu, E.K. Cerreta, T.A. Mason, P.J. Maudlin and J.F. Bingert
    Abstract | PDF file (708.5 KB)


  • Soft recovery of a ferrous alloy: Structural modification and properties     p. 971
    T. d'Almeida, D.J. Chapman, W.G. Proud, P.J. Gould, P.D. Church, M. Reynolds, R. Wheeler, H.J. MacGillivray, M. Di Michiel and J.M. Merino
    Abstract | PDF file (743.0 KB)


  • Dynamic shear deformation in high purity iron     p. 977
    E. Cerreta, J. Bingert, C. Trujillo, M. Lopez, C. Bronkhorst, B. Hansen and G. Gray
    Abstract | PDF file (901.0 KB)


  • Effect of the dynamic loading rate on the failure of bulk metallic glasses     p. 985
    H. Couque, Y. Champion and S. Nowak
    Abstract | PDF file (850.9 KB)


  • Strain rate-dependent shear band behavior in bulk metallic glasses     p. 993
    M.Q. Jiang and L.H. Dai
    Abstract | PDF file (647.4 KB)


  • Laser compression and fragmentation of metals     p. 999
    M.A. Meyers, H. Jarmakani, B.Y. Cao, C.T. Wei, B. Kad, B.A. Remington, E.M. Bringa, B. Maddox, D. Kalantar, D. Eder and A. Koniges
    Abstract | PDF file (1.155 MB)


  • Microstructure and texture evolution in high manganese TWIP steels     p. 1007
    S. Curtze, V.-T. Kuokkala, M. Hokka and T. Saarinen
    Abstract | PDF file (1.252 MB)


  • Multiscale analysis of the effect of grain size on the dynamic behavior of microalloyed steels     p. 1015
    A.K. Zurek, K. Muszka, J. Majta and M. Wielgus
    Abstract | PDF file (812.1 KB)


  • Strain induced martensitic transformation at high strain rate in two austenitic stainless steels     p. 1023
    S. Nanga, A. Pineau, B. Tanguy, L. Nazé and P.-O. Santacreu
    Abstract | PDF file (739.5 KB)


  • Effect of heat treatment on the dynamic deformation response of a Fe-10Ni-0.1C steel     p. 1031
    R. Gupta and K.S. Kumar
    Abstract | PDF file (1.002 MB)


  • Mechanical behaviour of SiO2 nano-particle filled epoxy at high strain rates     p. 1039
    L.M. Yang, G.C. Zhou, S.K. Liao, L. Song and L.J. Shen
    Abstract | PDF file (235.1 KB)


  • The mechanical response of a Uranium-Niobium alloy: A comparison of cast versus wrought processing     p. 1045
    C.M. Cady, G.T. Gray III, S.R. Chen, E.K. Cerreta, C.P. Trujillo, M.F. Lopez, R.M. Aikin Jr., D.R. Korzekwa and A.M. Kelly
    Abstract | PDF file (509.2 KB)


  • Evolution process of adiabatic shear localization in TC18 titanium alloy and 30CrMnSiNiMoV steel     p. 1053
    L. Wang, P. Miao, S.K. Li, K. Sun, X.W. Cheng and F.C. Wang
    Abstract | PDF file (635.3 KB)


  • Shock induced multi-mode damage in depleted Uranium     p. 1061
    D.D. Koller, E.K. Cerreta and G.T. Gray III
    Abstract | PDF file (635.5 KB)


  • Strain rate and temperature effects on stress-strain behaviour of cast high alloyed CrMnNi-steel     p. 1069
    L. Krüger, S. Wolf, U. Martin, P. Scheller, A. Jahn and A. Weiß
    Abstract | PDF file (721.4 KB)


  • Experimental and theoretical investigation of the dynamic properties of aluminum with helium bubbles     p. 1075
    B. Glam, S. Eliezer, D. Moreno, Z. Henis, E. Raicher, S. Pecker, M. Sudai and D. Eliezer
    Abstract | PDF file (540.6 KB)


  • The dynamic behaviour of a modified polyurethane resin     p. 1081
    G.J. Appleby-Thomas, P.J. Hazell, C. Stennett, G. Cooper and R. Cleave
    Abstract | PDF file (218.4 KB)


  • Influence of spherical converging shock waves on the structure of Al–4% Cu alloy     p. 1089
    A.V. Dobromyslov, N.I. Taluts, A.N. Uksusnikov and E.A. Kozlov
    Abstract | PDF file (1.671 MB)


  • High-rate deformation of a niobium single crystal under loading by spherical converging shock waves     p. 1095
    A.V. Dobromyslov, N.I. Taluts and E.A. Kozlov
    Abstract | PDF file (1.981 MB)


  • Mechanical behaviour of PMMA: Influence of temperature and confining pressure     p. 1103
    M. Nasraoui, P. Forquin, L. Siad, A. Rusinek and E. Dossou
    Abstract | PDF file (919.3 KB)


  • The effect of impact compaction on surface quality of powder discs     p. 1109
    P. Jonsén, H. Häggblad and M. Nishida
    Abstract | PDF file (376.7 KB)


  • Adiabatic shear localization of different steels at high strain rates     p. 1117
    W.S. Lee, C.Y. Liu and T.H. Chen
    Abstract | PDF file (1.171 MB)


  • Dynamic tensile behavior of Al-6Mg alloy with three treatment states     p. 1125
    M. Lin, B. Pang and W. Zhang
    Abstract | PDF file (1.243 MB)


  • High rate mechanical properties of Dyneema in compression     p. 1133
    S.M. Walley, D.J. Chapman, D.M. Williamson, M.J. Morley, T.W. Fairhead and W.G. Proud
    Abstract | PDF file (1.067 MB)


  • Detonation synthesis nanodiamonds for reinforcing metal matrix composite coatings operated under shock load     p. 1139
    V.A. Popov, L.S. Belevsky, A.L. Chuvilin, U. Kaiser, I.I. Khodos, A.S. Prosviryakov and M.N. Kovalchuk
    Abstract | PDF file (1.698 MB)


  • Comparison of low and high strain rate deformation mechanisms and texture evolution for a textured Ti6Al4V alloy     p. 1145
    F. Coghe, W. Tirry, L. Rabet and P. Van Houtte
    Abstract | PDF file (780.4 KB)


  • Strain rate dependence of a super-elastic NiTi alloy     p. 1153
    C.R. Siviour, J.E. Huber, T. Normanton and N. Petrinic
    Abstract | PDF file (367.0 KB)


  • Strain rate effects on the mechanical properties of high-purity α-titanium     p. 1161
    M.E. Nixon, O. Cazacu and J. House
    Abstract | PDF file (796.9 KB)


  • Dynamic damping properties of thermoplastic elastomers based on EVA and recycled ground tire rubber     p. 1167
    N. Roche, A. Chettah, M. Ichchou and M. Salvia
    Abstract | PDF file (686.7 KB)


  • Mechanical behavior of three dimension braided carbon/epoxy composite     p. 1173
    G. Lu, Z. Guoquan, C. Fan, Z. Shanyuan and J. Yang
    Abstract | PDF file (503.0 KB)


  • Influence of porosity on spallation behavior of pure aluminum under impact loading     p. 1179
    Y.G. Wang and H.L. He
    Abstract | PDF file (372.1 KB)


  • Connection of aluminum samples using gapless scheme in supersonic regime of shock-wave loading     p. 1185
    O. Drennov and A. Mikhaylov
    Abstract | PDF file (511.9 KB)


  • Shock properties of Nd2Fe14B material and design for shock-driven pulsed power source     p. 1189
    M. Chuan-Min, S. Shang-Chun, L. Qiao-yan, H. Hong-Liang, Z. Wen-Jun and Z. Feng
    Abstract | PDF file (598.5 KB)


  • Mechanical behavior of ultrafine grained OFHC Cu at high strain rates     p. 1195
    L.J. Park, H.W. Kim, C.S. Lee and K.-T. Park
    Abstract | PDF file (476.6 KB)


  • Formation of bulk nanostructure metals under dynamic loading     p. 1201
    E.V. Shorokhov, I.N. Zhgilev, V.I. Zeldovich, I.G. Brodova, I.V. Khomskaya, A.V. Abramov, I.V. Minaev, N.Yu. Frolova, N.E. Zababakhin, N.P. Oglezneva, P.A. Nasonov and I.G. Shirinkina
    Abstract | PDF file (434.0 KB)


  • Nondestructive evaluation of spall damage under repeated impact with ultrasonic method     p. 1209
    N. Nishimura, K. Murase and T. Ito
    Abstract | PDF file (705.5 KB)


  • Impact damage in concrete targets subjected to perforation of high velocity metallic fragment     p. 1215
    A. Arias, P. Forquin and R. Zaera
    Abstract | PDF file (744.1 KB)


  • Dynamic mechanical properties and failure mechanism of 50vol%SiCp/2024Al composites     p. 1223
    Y.W. Wang, F.C. Wang, X.D. Yu, C.Y. Wang and Z. Ma
    Abstract | PDF file (1.221 MB)



    • Constitutive Modeling

  • Modeling Bauschingher's effect in planar impact     p. 1231
    Y. Partom
    Abstract | PDF file (397.9 KB)


  • Formulation of a new constitutive equation available simultaneously for static and dynamic loadings     p. 1239
    A. Gavrus
    Abstract | PDF file (188.3 KB)


  • The use of symmetric Taylor impact to validate constitutive models for an fcc metal (copper) and a bcc alloy (RHA steel)     p. 1245
    L.C. Forde, S.M. Walley, M. Peyton-Jones, W.G. Proud, I.G. Cullis and P.D. Church
    Abstract | PDF file (679.4 KB)


  • Strain-rate – temperature superposition behavior of Polymethylene Diisocyanate (PMDI) based rigid Polyurethane foams with different densities     p. 1251
    B. Song, W.-Y. Lu and W. Chen
    Abstract | PDF file (341.1 KB)


  • Thermodynamics-based evaluation of the plastic work induced heating. Consequences on the dynamic localization conditions     p. 1257
    P. Longère and A. Dragon
    Abstract | PDF file (303.1 KB)


  • Development of a strain-rate dependent progressive damage model for crash analysis of composite laminates     p. 1263
    M.M. Shokrieh and M.J. Omidi
    Abstract | PDF file (412.8 KB)


  • Determination of damage parameters without numerical simulation using various shock experiments. The lead example     p. 1271
    C. Bolis, J. Dequiedt, J. Servas, C. Voltz, N. Cordier and D. Sihachakr
    Abstract | PDF file (331.3 KB)


  • Molecular dynamic simulation of thermodynamic and mechanical properties and behaviour of Be when high-rate straining     p. 1277
    V. Dremov, A. Karavaev, F. Sapozhnikov, M. Vorobyova, I. Derbenev and L. Soulard
    Abstract | PDF file (1.087 MB)


  • Advanced constitutive relations for steel alloys: Strain hardening and phase transformation effects     p. 1285
    A. Rusinek, J.R. Klepaczko, J.A. Rodríguez-Martínez and A. Arias
    Abstract | PDF file (283.2 KB)


  • Predictions from the equation of state of cerium yield interesting insights into experimental results     p. 1291
    F.J. Cherne, B.J. Jensen, P.A. Rigg and V.M. Elkin
    Abstract | PDF file (317.3 KB)


  • A probabilistic model for the ductile spalling of tantalum     p. 1295
    H. Trumel, F. Hild, G. Roy, Y.-P. Pellegrini and C. Denoual
    Abstract | PDF file (257.3 KB)


  • Flow and failure behaviour of materials at high strain rates     p. 1303
    E. El-Magd
    Abstract | PDF file (736.8 KB)


  • Failure and fragmentation of alumina cylinders under compressive loading     p. 1311
    F. Zhou and Y. Wang
    Abstract | PDF file (441.2 KB)


  • Equation of state of ductile granular materials     p. 1317
    R.G. Kraus, D.J. Chapman, P.D. Church, P. Gould, I.G. Cullis, R. Cornish and W.G. Proud
    Abstract | PDF file (439.9 KB)


  • Unconfined compressive strength is a poor indicator of the high-pressure mechanical response of concrete     p. 1325
    Y. Malecot, X.H. Vu and L. Daudeville
    Abstract | PDF file (426.2 KB)


  • Shear modulus of LY12 aluminum alloy under shock loadings and quasi-elastic unloading and the constitutive relations     p. 1333
    T. Hua, Y. Yuying, H. Jianbo and D. Chengda
    Abstract | PDF file (289.7 KB)


  • A modified analytic model of the shear modulus     p. 1339
    R. Hou, J. Peng, J. Zhang, M. Tu, X. Cui and Y. Wang
    Abstract | PDF file (198.0 KB)


  • A systematic investigation of the compressive behaviour of near equi-atomic NiTi over a range of strain rates and temperatures     p. 1345
    A. Patman and G.M. Swallowe
    Abstract | PDF file (585.6 KB)


  • Sound velocity measurement of LY12 Al alloy under tensile stress     p. 1353
    J. Hu, C. Dai, Y. Yu and H. Tan
    Abstract | PDF file (356.3 KB)


  • Dynamic tensile behavior of Neapolitan Yellow Tuff     p. 1359
    D. Asprone, E. Cadoni, A. Prota and G. Manfredi
    Abstract | PDF file (221.5 KB)


  • Thermo-mechanical model identification of a strengthened copper with an inverse method     p. 1367
    M. Peroni, L. Peroni and A. Dallocchio
    Abstract | PDF file (513.3 KB)


  • Parameters determination of constitutive models for a low alloy structural steel S355K2G3     p. 1375
    J. Mespoulet, A. Lachaud and P. Hereil
    Abstract | PDF file (434.8 KB)


  • Advanced experimental investigation and numerical simulation of polycarbonate behaviour at different strain-rate and temperature     p. 1383
    M. Peroni, L. Peroni and M. Avalle
    Abstract | PDF file (396.9 KB)


  • On the universal behavior of some organic compounds under compression     p. 1391
    B.A. Nadykto
    Abstract | PDF file (207.0 KB)


  • The dynamic compressible and shear responses of reactive materials-PTFE/Al     p. 1399
    P. Zhao, F. Lu, J. Li, Y. Lin, R. Chen, S. Xu and S. Yang
    Abstract | PDF file (526.9 KB)


  • A viscoplastic constitutive model for polymeric materials at finite deformations     p. 1407
    L.J. Shen and L.M. Yang
    Abstract | PDF file (166.6 KB)


  • A new constitutive model to study the propagation of thermal shock wave induced by electron beam radiating in Al alloy     p. 1413
    H. Chen, W. Tang, R. Zhang and X. Ran
    Abstract | PDF file (135.3 KB)


  • The HJC model parameters of an asphalt mixture     p. 1419
    W.-H. Tang, Y.-Q. Ding and X.-Y. Yuan
    Abstract | PDF file (347.8 KB)


  • Experimental research and the parameter global optimization with GAs method of phenolic resin     p. 1425
    G. Zhang, M. Xu, R. Zhang, X. Zhou and W. Tang
    Abstract | PDF file (228.6 KB)


  • Constitutive behavior of magnesium alloy sheet at high strain rates     p. 1431
    D. Hasenpouth, C. Salisbury, A. Bardelcik and M.J. Worswick
    Abstract | PDF file (325.4 KB)


  • Flow stress of lead-free solder alloys over a broad range of temperatures and strain rates     p. 1437
    T. Chen, X.Y. Niu, Z.G. Li and X.F. Shu
    Abstract | PDF file (581.6 KB)


  • Flow stress peaks at high strain rates in PMMA     p. 1443
    H.H. Forrester and G.M. Swallowe
    Abstract | PDF file (500.1 KB)


  • Instantaneous strain rate sensitivity of metastable austenitic stainless steel     p. 1449
    M. Isakov, V.-T. Kuokkala and R. Ruoppa
    Abstract | PDF file (201.8 KB)


  • Inverse identification of the constitutive equation parameters from cutting tests using nonparametric models and FEM techniques     p. 1457
    A. Muñoz-Sánchez, I. González, H. Miguélez and J.A. Canteli
    Abstract | PDF file (463.9 KB)


  • Experimental and numerical analysis of high strain rate response of Ti-6Al-4V titanium alloy     p. 1465
    A. Bragov, A. Konstantinov, A. Lomunov, I. Sergeichev and B. Fedulov
    Abstract | PDF file (399.3 KB)



    • Numerical Simulations

  • Meteorite impact shatter cones – adiabatic shear bands?     p. 1471
    E. Dawson
    Abstract | PDF file (304.9 KB)


  • Coupling discrete elements with shell finite elements to simulate impacts on reinforced concrete structures     p. 1479
    J. Rousseau, P. Marin, L. Daudeville and S. Potapov
    Abstract | PDF file (570.7 KB)


  • Dynamic Eulerian modeling of visco-plastic crystals     p. 1485
    O. Cazacu and I.R. Ionescu
    Abstract | PDF file (328.4 KB)


  • Implicit 2D numerical simulation of materials submitted to high strain rates including fracture     p. 1491
    P.-P. Jeunechamps and J.-P. Ponthot
    Abstract | PDF file (605.7 KB)


  • Large-scale molecular dynamics simulations of particulate ejection and Richtmyer-Meshkov instability development in shocked copper     p. 1499
    T.C. Germann, G. Dimonte, J.E. Hammerberg, K. Kadau, J. Quenneville and M.B. Zellner
    Abstract | PDF file (711.8 KB)


  • Safety assessment of solid rocket motors under impact loading     p. 1507
    N. Couroneau, Y. Garcia and O. Cauchois
    Abstract | PDF file (1.092 MB)


  • Predicting deformation and fracture initiation of steel panels subjected to close-in explosions     p. 1515
    J.M. Luyten and M.D. Tyler-street
    Abstract | PDF file (705.2 KB)


  • Modeling of the fragmentation by Discrete Element Method     p. 1523
    C. Mariotti, V. Michaut and J.F. Molinari
    Abstract | PDF file (235.2 KB)


  • State based peridynamic modeling of dynamic fracture     p. 1529
    J.T. Foster, S.A. Silling and W.W. Chen
    Abstract | PDF file (478.6 KB)


  • Polymer plates subjected to impact: Experimental tests and numerical simulations     p. 1537
    A.H. Clausen, M. Polanco-Loria, R.T. Moura, M. Alves, T. Berstad, M. Langseth and O.S. Hopperstad
    Abstract | PDF file (329.7 KB)


  • The effect of water content on the shock compaction of sand     p. 1545
    J.P. Borg and T.J. Vogler
    Abstract | PDF file (667.0 KB)


  • Simulation of laminated glass loaded by air blast waves     p. 1553
    M. Larcher
    Abstract | PDF file (535.3 KB)


  • Numerical investigation of the bodywork effect (K-effect)     p. 1561
    N. Nsiampa, F. Coghe and G. Dyckmans
    Abstract | PDF file (558.3 KB)


  • Dynamic delamination mpodeling using cohesive finite elements     p. 1567
    M. Ilyas, Ch. Espinosa, F. Lachaud and M. Salaün
    Abstract | PDF file (1.194 MB)


  • Micro-mechanical behavior of Al-MnO2-Epoxy under shock loading     p. 1575
    A. Fraser, J.P. Borg, J.L. Jordan and G. Sutherland
    Abstract | PDF file (842.7 KB)


  • A finite strain energetic analysis of the hollow sphere problem under hydrostatic loading     p. 1583
    S. Zambelli, G. Roy, F. Hild, H. Trumel and Y.-P. Pellegrini
    Abstract | PDF file (354.3 KB)


  • Influence of flow stress and strain hardening of high strength structural steel on the necking formation under dynamic tension     p. 1589
    J.A. Rodriguez-Martinez, A. Rusinek and A. Arias
    Abstract | PDF file (301.6 KB)


  • Localization in shell expansion in biaxial loading conditions     p. 1595
    J.L. Dequiedt
    Abstract | PDF file (581.4 KB)


  • Simulation of multiple shear-bands in collapsing cylinder experiments     p. 1601
    Z. Lovinger and Y. Partom
    Abstract | PDF file (412.8 KB)


  • Implicit FE simulations of composite dynamic failure     p. 1609
    G. Deliége, L. Papeleux and J.-P. Ponthot
    Abstract | PDF file (407.9 KB)


  • Simple method to determine the temperature of shock compressed metals including free electronic contribution and its application to aluminum and copper     p. 1615
    X. Ran, Z. Xu and W. Tang
    Abstract | PDF file (130.4 KB)


  • Numerical simulation study of the strain rate effect on concrete in compression considering material heterogeneity     p. 1621
    Y. Lu, Z.H. Song and Z.G. Tu
    Abstract | PDF file (638.8 KB)


  • Predicting the damage/failure transition in polymer-bonded explosives     p. 1629
    P.J. Gould, D. Porter and I.G. Cullis
    Abstract | PDF file (119.3 KB)


  • Numerical simulation of far-field underwater explosion-induced damage of ship structure     p. 1635
    A.-G. Geffroy, P. Longère and B. Leblé
    Abstract | PDF file (1.072 MB)


  • Numerical analysis of the projectile deformation during the penetration of concrete targets     p. 1643
    W. Zhang, Z.-C. Mu, Z.-S. Cao and X.-K. Xiao
    Abstract | PDF file (402.7 KB)


  • Measuring dynamic strength at low plastic strains using a hat-shaped specimen     p. 1649
    Z. Lovinger, Y. Ashuach and O. Firstenberg
    Abstract | PDF file (755.1 KB)


  • On determination of spall strength under dynamic tensile loading     p. 1657
    P. Xiao-Yang, L. Ping and H. Hong-Liang
    Abstract | PDF file (198.4 KB)


  • Modeling of high temperature Hopkinson tests on AA5083 and Ti6Al4V     p. 1663
    L. Berkovic, R. Ryckaert, A. Chabotier, L. Gilson, F. Coghe and L. Rabet
    Abstract | PDF file (691.3 KB)


  • Numerical simulation about dynamic bond-slip between reinforcing steel bar and concrete     p. 1669
    H. Wu, Y. Lu, F. Huang and Z. Zhou
    Abstract | PDF file (893.6 KB)


  • Experimental and numerical study of pultruded composite tubes under blast loading     p. 1677
    D.A. Kakogiannis, D. Van Hemelrijck, J. Wastiels, J. Van Ackeren, S. Palanivelu, W. Van Paepegem, J. Vantomme, G.N. Nurick and S.C. Kim Yuen
    Abstract | PDF file (441.8 KB)


  • Numerical simulations of SHPB tests using 921A steel pure shear hat-shaped specimens     p. 1685
    J.C. Li, X.W. Chen and G. Chen
    Abstract | PDF file (747.7 KB)


  • Demonstration of survivable space penetrator     p. 1693
    P. Church, W. Huntington-Thresher, A. Bruce, N. Penny, A. Smith and R. Gowan
    Abstract | PDF file (421.1 KB)


  • Numerical simulation on penetration of rod projectile into YB-AD90 ceramic- composite target     p. 1699
    Z.F. Sun, P. Li, H. Xu, H.L. He, Q.Z. Li, J.X. Peng and D.H. Li
    Abstract | PDF file (306.5 KB)


  • Numerical procedure for the prediction of projectile residual velocity for impact on mild steel plates     p. 1707
    R. Munusamy, A. Deb and D. C. Barton
    Abstract | PDF file (267.9 KB)


  • Experimental & numerical studies on ballistic impact of armour steel by armour piercing projectiles     p. 1715
    A. Banerjee and N. Nayak
    Abstract | PDF file (1011 KB)


  • Molecular instability at the shear-stress interface     p. 1723
    M.M. Kuklja and S.N. Rashkeev
    Abstract | PDF file (524.7 KB)


  • Numerical analysis of the influence of cutting speed in machined induced residual stresses in aero-engine alloys     p. 1729
    H. Miguélez, R. Zaera, R. Cheriguene and A. Molinari
    Abstract | PDF file (227.7 KB)


  • Numerical simulation of wave propagation in cracked shafts     p. 1737
    L. Rubio, B. Muñoz-Abella and G. Loaiza
    Abstract | PDF file (742.5 KB)


  • Response of bonded assembly under shock wave loading     p. 1745
    D. Laporte, F. Malaise, P.-L. Hereil, E. Buzaud and J.-M. Chevalier
    Abstract | PDF file (540.9 KB)


  • Penetration of a plastically-deforming target by slender projectiles     p. 1753
    V.P.W. Shim, Y.B. Guo, L.C. Boey and B.P. Lim
    Abstract | PDF file (259.4 KB)


  • Ballistic performance of laminated composites against military impactors: Experimental and numerical studies     p. 1761
    N. Nayak, A. Banerjee and A.L. Dutta
    Abstract | PDF file (450.4 KB)


  • Finite element analysis of Charpy tests on extruded aluminium alloys     p. 1767
    Y. Chen, O.S. Hopperstad, A.H. Clausen, T. Børvik and T. Berstad
    Abstract | PDF file (845.4 KB)


  • Evidence recovery from the post impact characterization of a Full Metal Jacket 9 mm Parabellum bullet     p. 1775
    F. Bresson, C. Marechal, O. Franck and P. Drazetic
    Abstract | PDF file (525.9 KB)


  • Response of layered structures to buried charge explosion     p. 1783
    J. Buchar and S. Rolc
    Abstract | PDF file (611.0 KB)


  • Cluster dynamics method for simulation of dynamic processes of continuum mechanics     p. 1789
    V.N. Piskunov, I.A. Davydov, R.A. Veselov, B.L. Voronin, D.A. Demin, A.M. Petrov, N.V. Nevmerzhitskiy and V.N. Sofronov
    Abstract | PDF file (308.4 KB)


  • Experimental and numerical study of high velocity impacts on carbon/epoxy laminates     p. 1799
    D. Varas, J. López-Puente and R. Zaera
    Abstract | PDF file (588.5 KB)


  • Modelling of the failure of carbon-fibre laminates subjected to dynamic loads     p. 1807
    S. Sanchez-Saez, J. Lopez-Puente, E. Barbero and C. Navarro
    Abstract | PDF file (577.9 KB)


  • Dynamic behavior of reinforced concrete (RC) structures subjected to inside explosion of metal cased TNT     p. 1815
    Y. Nakayama, T. Homae, D. Takagaki, T. Matsumura, K. Wakabayashi, K. Ishikawa and M. Iida
    Abstract | PDF file (864.1 KB)


  • The influence of tool wear in surface integrity when machining austenitic stainless steel     p. 1823
    A. Muñoz-Sánchez, H. Miguélez, J.A. Canteli and J.L. Cantero
    Abstract | PDF file (661.0 KB)


  • Numerical simulation of dynamic four-bending-tests using a modified Split Hopkinson Pressure Bar     p. 1831
    J.A. Loya, L. Rubio and J. Fernández-Sáez
    Abstract | PDF file (380.0 KB)


  • Determination of the constants of material models by optimization and numerical simulation     p. 1839
    G.H. Majzoobi, S. Khosroshahi and H. Beikmohahhadloo
    Abstract | PDF file (875.7 KB)







© EDP Sciences 2009